Retired - Dana Point Necklace and Earrings

PROJECT S2013
Designer: Kat Silvia
Skill Level: Intermediate
A stunning arrowhead focal from Zola Elements adorns a long necklace with Czech Glass Bohemian Aged Seed beads. Complete the look with a pair of dangling delicate earrings.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

This necklace measures approximately 26 inches. To modify the length, simply adjust the length of chain on both sides respectively.
  1. For the earrings: begin by taking one head pin, string on one seed bead and make a wrapped wire loop. Repeat 6 more times.
  2. Next, take one head pin and turn it into an eye pin by snipping off the pin head, and making a simple wire loop at one end. Then string on one seed bead and make another simple wire loop.
  3. To assemble the earring, we will be working our way up the earring. Open the loop of one of the eye pins, same as you would a jump ring, and attach three dangles with the wrapped wire loops. Close this loop.
  4. Take another eye pin, open the loop and slip on one wrapped wire loop dangle, then slip on the top of the eye pin from the previous step and one more dangle. Close the loop. Repeat this step one more time.
  5. Open the loop of the earring hook and slip it on to the top loop of the last eye pin. Close the loop. Repeat all of the above steps to make the second earring.
  6. For the necklace: begin by finding the center link of the 24 inches length of chain. Open one jump ring and attach the arrowhead focal pendant to the center link. Close the jump ring.
  7. Take one head pin and string on one seed bead, make a wrapped wire loop, but before you wrap the wire, attach it to the link of chain just to the right of the link you attached the pendant too. Wrap the wire and trim any excess. Repeat five more times, moving one link to the right each time. Then repeat on the other side of the pendant.
  8. Move to the end of the chain on one side. Open a jump ring and attach one lobster clasp to the end link. Close the jump ring.
  9. Move to the other side of the necklace and attach one jump ring to the last link of the chain. Close the jump ring.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • CHA-0144 - Nunn Design Bulk Chain, Delicate Cable Links 2.5x2mm, By the Foot, Antiqued Gold
    Project uses 24 Inches. You will need 2 packages.

  • FHP-5215 - 22K Gold Plated Head Pins - 22 Gauge/1.5 Inches (50)
    Project uses 32 pieces. You will need 1 package.

  • BCS-9042 - Czech Glass, Bohemian Aged 6/0 Round Seed Beads, 10 Grams, Etched Green Turquoise and Capri
    Project uses 32 pieces. You will need 1 package.

  • FJR-5240 - 22K Gold Plated Open Jump Rings 4mm 21 Gauge (x100)
    Project uses 3 pieces. You will need 1 package.

  • FCL-2514 - Gold Plated Curved Lobster Clasps 12mm (10 Pieces)
    Project uses 1 piece. You will need 1 package.

  • FEA-3020 - 22K Gold Plated Fish Hook Earring Hooks 15x15mm (50)
    Project uses 2 pieces. You will need 1 package.

  • PZE-159 - Zola Elements Pendant, Desert Fancy Arrowhead 24x47mm, 1 Piece, Antiqued Gold Tone
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
Additional Information
Theme Yoga, Summer, Boho
Ingredients CHA-0144, FHP-5215, FJR-5240, FCL-2514, FEA-3020,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Antiqued Gold Plated Cable Chain, 2x2.5mm, by Nunn Design Chain, by the Foot
You will need 2 package(s).
1 package = By the Foot.
$3.37 / Package | SKU: CHA-0144
Head Pins, 1.5 Inches Long and 22 Gauge Thick, 22K Gold Plated (50 Pieces)
You will need 1 package(s).
1 package = 50 Pieces.
$4.15 / Package | SKU: FHP-5215
22K Gold Plated Open Jump Rings 4mm 21 Gauge (100 pcs)
You will need 1 package(s).
1 package = 100 Pieces.
$3.27 / Package | SKU: FJR-5240
Lobster Clasps, Curve 12mm, Gold Plated (10 Pieces)
You will need 1 package(s).
1 package = 10 Pieces.
$9.55 / Package | SKU: FCL-2514
Earring Findings, Fish Hook Ear Wire 15x15mm, Gold Plated (25 Pairs)
You will need 1 package(s).
1 package = 25 Pairs.
$6.39 / Package | SKU: FEA-3020
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.29 / Package | SKU: XTL-5514

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed