Retired - Crest of the House

Name: Retired - Crest of the House
Brand: Beadaholique
SKU: N2010
Availability: OutOfStock

PROJECT N2010

Designer: Kat Silvia

Skill Level: Intermediate

Save to Wishlist

Printer Friendly PDF
(if available)

Inspired by Medieval sigils, I used flat odd-count peyote beadweaving to form the patch-like focal piece of this necklace.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

Before you begin this project, watch these videos:
How to Flat Odd-Count Peyote Stitch
How to do Decreases in Flat Peyote Stitch
How to Use the Vintaj Relief Block
To make the peyote crest, please follow the pattern attached to this project using the techniques you learned in the videos above.
Using the Vintaj block, rub the Lion and Snake pendant until the you get the desired shine.
To adhere the pendant to the peyote crest, use a good amount of E6000 on the back of the pendant. Flip over and place in the center of the crest. Since you will be using a good amount of glue, you may want to let the glue dry overnight.
Cut 24 inches of thread and place a needle onto one end. Do not tie a knot at the end.
To form the gold circle of delicas around the crest string 58 gold beads (do not let them slip off the thread) and form a loop by going back around through the strand of 58 delicas a second time. Once you have made a full loop around, tie your two thread ends together in a secure knot. Cut off the extra thread.
Use a scrap of wire or toothpick to put a thin line of E6000 around the outer rim of the lion and snake pendant. Carefully place the circle of gold delicas around the pendant. Press and hold in place. Let dry.
Cut your two feet of chain into two 12 inch lengths.
Open a gold jump ring and hook it through the gold delica on the outer point of the crest on the right hand side. Before closing the jump ring, attach a 12 inch length of chain. Repeat this step on the other side of your crest.
At the ends of the chain, open one link of the chain, the same as you would a jump ring and attach the clasp to the chain. Close the chain link.

WHAT YOU'LL NEED: (scroll down for purchase options)

CHA-9806 - Nunn Design Antiqued Gold Plated Textured Cable Chain By The Foot
Project uses 2 feet. You will need 2 packages.

PND-7141 - Vintaj Natural Brass Round Lion Snake Figural Pendant 30mm (1)
Project uses 1 piece. You will need 1 package.

DBM-0042 - Miyuki Delica Seed Beads 10/0 'Silver Lined Gold' DBM0042 8 GR
Project uses 1 tube. You will need 1 package.

DBM-0723 - Miyuki Delica Seed Beads 10/0 Opaque Red DBM0723 8 GR
Project uses 1 tube. You will need 1 package.

FJR-5452 - 22K Gold Plated Open Jump Rings 4mm 22 Gauge (50)
Project uses 2 pieces. You will need 1 package.

FCL-7016 - TierraCast 22K Gold Plated Pewter Vine Hook And Eye Clasp 7mm (1 Set)
Project uses 1 piece. You will need 1 package.

XCR-8933 - Wildfire Thermal Bonded Beading Thread .006 Inch - White- 50 Yd
Project uses 1 Spool. You will need 1 package.

XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
XTL-0106 - BeadSmith Cordless Thread Zap II Thread Burner Tool
XTL-3006 - Beadsmith English Beading Needles Size 12 (4 Needles)
XTL-2222 - Vintaj Metal Relief Block For Filing, Buffing & Sanding

Additional Information

Ingredients

CHA-9806, DBM-0042, DBM-0723, FJR-5452, FCL-7016, XCR-8933, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

            
You will need 2 package(s).
1 package = .

             / Package | SKU: CHA-9806

Miyuki Delica Seed Beads, 10/0 Size, Silver Lined Gold DBM0042 (7.2 Grams)

            Miyuki Delica Seed Beads, 10/0 Size, Silver Lined Gold DBM0042 (7.2 Grams)
        
You will need 1 package(s).
1 package = 8 Grams.

                $3.87
            
             / Package | SKU: DBM-0042

Sold out

Miyuki Delica Seed Beads, 10/0 Size, Opaque Red DBM0723 (7.2 Grams)

            Miyuki Delica Seed Beads, 10/0 Size, Opaque Red DBM0723 (7.2 Grams)
        
You will need 1 package(s).
1 package = 8 Grams.

                $4.30
            
             / Package | SKU: DBM-0723

Sold out

22K Gold Plated Open Jump Rings 4mm 22 Gauge (50 pcs)

            22K Gold Plated Open Jump Rings 4mm 22 Gauge (50 pcs)
        
You will need 1 package(s).
1 package = 50 Pieces.

                $3.07
            
             / Package | SKU: FJR-5452

            
You will need 1 package(s).
1 package = .

             / Package | SKU: FCL-7016

Wildfire Thermal Bonded Beading Thread .006 Inch - Frost / White- 50 Yd

            Wildfire Thermal Bonded Beading Thread .006 Inch - Frost / White- 50 Yd
        
You will need 1 package(s).
1 package = 1 Spool.

                $10.29
            
             / Package | SKU: XCR-8933

Sold out

E6000 Industrial Strength Glue Adhesive (0.18 fl oz)

            E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
        
You will need 1 package(s).
1 package = 1 Piece.

                $2.19
            
             / Package | SKU: XTL-1054