Retired - Cosmic Circle Earrings

PROJECT E8059
Designer: Alexandra Smith
Skill Level: Beginner
Glistening stainless steel beads accentuate the sheen of deep blue Austrian crystal rings in these simple and elegant earrings, finished using complementary stainless steel earring hooks.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

By following the instructions below, you will make one earring. Repeat all instructions to make the second earring.
  1. Begin by using flush cutters to cut 1.5 inches of 24 gauge wire. Onto one end of the wire, make a simple wire loop.
  2. Slide on one 4mm stainless steel bead, then make another simple wire loop on the other side of the bead.
  3. Repeat steps 1 and 2, this time using two inches of wire and a 6mm stainless steel bead. Note: make sure that one of your loops is at least 6mm in diameter to accamodate the Austrian Crystal ring that you will be attaching in step 5.
  4. Use pliers to open a loop on one side of your 4mm bead the same way you would open a jump ring, and slide on the smaller loop of your 6mm wrapped bead. Close the loop.
  5. Next, open the larger loop of your 6mm wrapped bead, and slide on the Austrian Crystal Ring. Close the loop.
  6. To attach your earring hook: Open the loop on your earring hook the same way you would open a jump ring, and slide on the opposite loop of your 4mm bead. Close the loop.
  7. Enjoy!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • SWC-9013 - Austrian Crystal, 4139 Cosmic Ring Pendant 14mm, 1 Piece, Bermuda Blue
    Project uses 2 pieces. You will need 2 packages.

  • BMB-4407 - Stainless Steel Beads, Round 4mm, 20 Pieces
    Project uses 2 pieces. You will need 1 package.

  • BMB-4408 - Stainless Steel Beads, Round 6mm, 10 Pieces
    Project uses 2 pieces. You will need 1 package.

  • FEA-9753 - Earring Hooks, French Wire 25mm, 144 Pieces, Stainless Steel
    Project uses 2 pieces. You will need 1 package.

  • WCR-2440 - Artistic Wire, Copper Craft Wire 24 Gauge Thick, 10 Yard Spool, Stainless Steel
    Project uses 7 inches. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
  • XTL-0034 - Wubbers Classic Series Round Nose Quality Jeweller's Pliers
  • XTL-0020 - Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers
Additional Information
Theme Winter
Ingredients BMB-4407, BMB-4408, FEA-9753, WCR-2440,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Stainless Steel Beads, Round 4mm, (20 Pieces)
You will need 1 package(s).
1 package = 20 Pieces.
$3.49 / Package | SKU: BMB-4407
Stainless Steel Beads, Round 6mm (10 Pieces)
You will need 1 package(s).
1 package = 10 Pieces.
$2.59 / Package | SKU: BMB-4408
Earring Hooks, French Wire 25mm, Stainless Steel (144 Pieces)
You will need 1 package(s).
1 package = 72 Pairs.
$4.99 / Package | SKU: FEA-9753
Artistic Wire, Copper Craft Wire 24 Gauge Thick, Stainless Steel (10 Yard Spool)
You will need 1 package(s).
1 package = 1 Spool.
$4.47 / Package | SKU: WCR-2440
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Wubbers Classic Series Round Nose Quality Jeweller's Pliers
Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers
$32.99 / Package | SKU: XTL-0020

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed