Retired - Cornflower Necklace

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. If you are new to 2-part epoxy resin, you can watch the video: How to Use Nunn Design Resin.
2. Please watch the video: How to Incorporate Organic Matter into 2-Part Resin by Becky Nunn. Set up your bezel on thick tape as shown in the video.
3. Put on your face mask and disposable gloves. Based on the technique shown in the video in step 1, mix the resin in a mixing cup and stir gently with a craft stick until all striations are gone.
4. Based on the technique shown in the video in step 2, prepare your organics and position them in your bezel. Then carefully fill the bezel with the desired amount of resin. Remove any air bubbles with a heat source such a small torch. Let the resin harden and cure for three days in a dust-free and well-ventilated area before proceeding.
5. To hang your pendant: Use pliers to open a 4mm jump ring, and attach the loop of your pendant onto your finished chain. Close the jump ring.
6. Enjoy your necklace!

• PND-08247 - Nunn Design Open Frame Pendant, Circle 25x30.5mm, 1 Piece, Antiqued Gold
  Project uses 1 piece. You will need 1 package.


• FJR-5250 - 22K Gold Plated Open Jump Rings 5mm 20 Gauge (100)
  Project uses 1 piece. You will need 1 package.


• AXC-023 - Finished Ball Chain Necklace, 2mm Links with Spring Ring Clasp, 16 Inches, 22K Gold Plated
  Project uses 1 piece. You will need 1 package.


• TRC-14 - Nunn Design 2-Part Epoxy Resin Kit, Jewelers Grade Clear, 8 Oz Kit
  Project uses 1 kit. You will need 1 package.

• XTL-101 - Micro Grip Pliers, Long Chain Nose, 5 Inches Long, 1 Piece
• XTL-103 - Micro Grip Pliers, Bent Chain Nose, 5 Inches Long, 1 Piece
• XTL-9920 - Beadaholique Bead Mat, 12.5x9.25 Inches, 1 Piece