Retired - Copper Redwood Bangle

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. To begin, place a dab of patina on to your work surface. With a paint brush dab the emerald patina onto the center of the charm getting it into the grooves of the raised tree portion. Wipe off excess patina quickly.
2. If you like, add more patina to build the color and wipe off any excess.
3. Cut off 5 inches of micro suede.
4. Thread the suede though the hole of the charm and around the bangle. Tie an overhand knot. If the length is too long you can trim the ends for your desired look.
5. All done!

• JB-2650 - Nunn Design Antiqued Copper Plated Round Bangle Bracelet - 2 3/4 Inch (1)
  Project uses 1 piece. You will need 1 package.


• PND-08355 - Nunn Design Charm, Redwood 13.5x21.5mm, 1 Piece, Antiqued Copper
  Project uses 1 piece. You will need 1 package.


• XTL-9083 - Vintaj Patina Opaque Permanent Ink - Emerald Green - 0.5 Ounce Bottle
  Project uses 1 piece. You will need 1 package.


• XCR-43102 - Beadsmith Medium Brown Faux Leather Suede Beading Cord 9Ft (3 Yd) Spool
  Project uses 5 inches. You will need 1 package.

• XTL-5700 - Fiskars 5 Precision Tip Scissors - Super Sharp
• XTL-880 - ICE Resin, Angled Brushes for ICED Enamels & Paper Sealant, 6 Pack