Retired - Boho Chic Earrings

Name: Retired - Boho Chic Earrings
Brand: Beadaholique
SKU: E3007
Availability: OutOfStock

PROJECT E3007

Designer: Karlin Jones

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF
(if available)

These earrings showcase a unique Golem Studio glazed ceramic bead with a white and brown abstract flower design. The clay bead is paired with bronze and jet Austrian crystal bicone beads. A very pretty and natural look!

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

By following the instructions below, you will make one earring. Repeat all instructions to make the second earring.

Begin by stringing on your antiqued brass headpin: one jet hematite bicone, one Golem Studios clay bead, one jet bicone and one bronze bicone.
Once all the beads are on your headpin, create a simple wire loop using your round nose pliers. Cut off excess wire with flush cutters.
Open the loop on your earring hook (like you would a jump ring) and slide on your wire loop and close.
Your earring is now ready.

WHAT YOU'LL NEED: (scroll down for purchase options)

SWBB-1515 - Austrian Crystal, 5328 Bicone Beads 5mm, 20 Pieces, Jet
Project uses 4(1) pieces. You will need 1 package.

SWBB-15301 - Austrian Crystal, 5328 Bicone Beads 5mm, 20 Pieces, Crystal Bronze Shade
Project uses 2(1) pieces. You will need 1 package.

FEA-3310 -
Project uses 2(1) pieces. You will need 1 package.

FHP-06303 - Antiqued Brass Head Pins - 21 Gauge 3 Inches (25)
Project uses 2(1) pieces. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex

Additional Information

Theme	Boho
Ingredients	FHP-06303,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

Head Pins, 3 Inches Long and 21 Gauge Thick, Antiqued Brass (25 Pieces)

            Head Pins, 3 Inches Long and 21 Gauge Thick, Antiqued Brass (25 Pieces)
        
You will need 1 package(s).
1 package = 25 Pieces.

                $5.49
            
             / Package | SKU: FHP-06303