Blue Sky Loom Bracelet

PROJECT B2292
Designer: Kat Silvia
Skill Level: Advanced
This graduated loom pattern looks like a blue digital sky by using our Exclusive Beadaholique Designer Palette in a lovely Ombre blue.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

Please watch our video: How to Use the Ricks Beading Loom. Set up your loom so that you have 6 inches from pole to pole. The clasp will add about 1/2 inch to the overall length.
  1. Notes about the Pattern: If you want to adjust the length you may need to adjust the pattern. I recommend starting in the center of the pattern (meaning at the bottom of the first pattern with the grey beads on it) and working your way out to make sure you have enough room on both sides. You can adjust as you get closer to the poles.
  2. Set up the loom with 27 warp threads. Thread your loom needle with a length of thread you are comfortable working with. As you weave you will need to tie off and add new thread.
  3. For this pattern the grey beads represent the matte opaque royal blue beads, then graduate to the opaque light sapphire beads and finally the opaque agate beads. The white lined crystal AB beads are the white backdrop of the pattern.
  4. Weave the loom until you have no more room to add rows. Once you have finished weaving, slide the work off of the loom poles.
  5. Next, please watch: How to Use Slide End Tubes for Miyuki Delica Bead Weaving. In this video you'll see how to slide on your ends to the loom work.
  6. Finally to attach the clasp, open one jump ring and attach it to the loop of one slide end. Close the jump ring. Attach another jump ring to this one, and then add one more. Then open one more jump ring to the last jump ring you added and to one end of the toggle clasp. Complete this for all four clasp portions around the bracelet.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • JK-0076 - Exclusive Beadaholique Designer Palette, Miyuki Delica Seed Bead Mix, 11/0 Size, 28.8 Grams, Blue Sky
    Project uses 1 piece. You will need 1 package.

  • FCO-9094 - Miyuki Findings Silver Tone 2 Loop Seed Bead Slide End Tubes 35mm (2)
    Project uses 2 pieces. You will need 1 package.

  • FCL-3038 - Antiqued Silver Plated Toggle Clasps 9mm (5 Sets)
    Project uses 1 Set. You will need 1 package.

  • FJR-5140 - Silver Plated Open Jump Rings 4mm 21 Gauge Thick (100)
    Project uses 16 pieces. You will need 1 package.

  • XCR-8901 - NYMO Nylon Beading Thread Size D for Delica Beads White 64YD (58 Meters)
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-6117 - BeadSmith Ricks Beading Loom Kit For Beginners - Weave Necklaces Bracelets And More!
  • XTL-3021 - Tulip Loom Work Beading Needles 90x0.5mm - 3 Pack
  • XTL-5614 - BeadSmith Tools, Thread Snips 4.25 Inches Long, 1 Piece
  • XTL-0020 - Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers
  • XTL-0023 - Baby Wubbers Quality Fine Bent Chain Nose Jeweller's Pliers
Additional Information
Theme Winter, Summer
Ingredients JK-0076, FCO-9094, FCL-3038, FJR-5140, XCR-23FJ,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Tip: Save this project to your wishlist to easily return to project instructions.
Exclusive Beadaholique Designer Palette, Miyuki Delica Seed Bead Mix, 11/0, 28.8g, Blue Sky Ombre
You will need 1 package(s).
1 package = Pack/4 Tubes.
$19.29 / Package | SKU: JK-0076
You will need 1 package(s).
1 package = .
/ Package | SKU: FCO-9094
You will need 1 package(s).
1 package = .
/ Package | SKU: FCL-3038
Silver Plated Open Jump Rings 4mm 21 Gauge Thick (100 pcs)
You will need 1 package(s).
1 package = 100 Pieces.
$2.39 / Package | SKU: FJR-5140
NYMO Nylon Beading Thread Size D for Delica Beads White 64YD (58 Meters)
You will need 1 package(s).
1 package = 1 Bobbin.
$2.89 / Package | SKU: XCR-23FJ
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Tulip Loom Work Beading Needles 90x0.5mm - 3 Needles
$5.79 / Package | SKU: XTL-3021
Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers
$32.99 / Package | SKU: XTL-0020
Baby Wubbers Quality Fine Bent Chain Nose Jeweller's Pliers

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Customer Reviews

Based on 2 reviews Write a review

You recently viewed

Clear recently viewed

Customer Reviews

Based on 3 reviews
0%
(0)
0%
(0)
0%
(0)
67%
(2)
33%
(1)
K
Katherine
Addendum

I only checked the PDF for this pattern and did not find the photo there. I just found it as a separate option under the photo of the bracelet itself. Still rather small for my (somewhat older) eyes. As I said before, surprised that it wasn't a usual page three in the PDF.

K
Katherine
The previous reviewer is correct

It's so unusual to have a bad review here that I had to check the PDF for this bracelet to see what was up. The previous reviewer was right to be frustrated -- you reference a third photo in your reply but, as I said, I checked. There is no third photo, unless you mean the thumbnail on page two of the PDF. Every other file I've used has that third page with the pattern large enough to read. The only photos on this one do not show the entire bracelet. I suspect that a page was omitted in error.

V
Violet
Where is the Pattern

You say you have free loom patterns, but you do not. Why waste my time???

Hello Violet, welcome to Beadaholique. Many of our free beading projects do include loom patterns for reference. You can often find them in the photo gallery and/or on the printer-friendly PDF. With this project, the loom pattern is the third photo and all photos are also on the PDF for you to print out and save. If you ever have problems in the future using our website and don't know where to find things, please reach out to our customer service team. We're here to help!