Bauble Charm Earrings

PROJECT PROJ-JB-E0029
Designer: Julie Bean
Skill Level: Beginner
These bauble charm earrings remind me of a classic charm bracelet with all their dangles and a focal charm by Nunn Design. You could even consider adding more dangles or another lightweight charm to the earring.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

When you make your wrapped wire loops for these earrings, make them a bit larger than usual so they are about the same size as the 5mm jump rings used in this project. Also, it's okay to have slightly "messier" loops to create a more organic feel. You are going to be making a bunch of dangles and then slipping them onto the hoop.
  1. Place onto a ball head pin 1 teacup bead facing up, 1 pearl, 1 teacup bead facing down. Create a wrapped wire loop and trim off excess wire. Create a total of 2 of these.
  2. Place onto a ball head pin 1 teacup bead facing up, 1 bicone bead, 1 teacup bead facing down. Create a wrapped wire loop and trim off excess wire. Create a total of 2 of these.
  3. Place onto a ball head pin 1 teacup bead facing down and 1 pearl. Create a wrapped wire loop and trim off excess wire. Create a total of 2 of these.
  4. Open a jump ring and place onto it the crystal pendant. Close the jump ring. Make a total of 3 of these.
  5. Open a jump ring and place your charm onto it. Close the jump ring.
  6. Now slip these dangles you just made onto your earring in the following order: a crystal pendant, the pearl and 2 teacup bead dangle, the bicone bead and 2 teacup bead dangle, the pearl with 1 teacup bead dangle, the charm, a crystal pendant, the pearl with 1 teacup bead dangle, the bicone bead with 2 teacup bead dangle, the pearl and 2 teacup bead dangle, and finally another crystal pendant.
  7. Repeat the previous instructions from start to finish to make your second earring. You can also view these earrings being made in the video: How to Make the Bauble Charm Earrings with Teacup Beads, Nunn Design Components and PRESTIGE Crystals.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • BCTC-1046 - Czech Glass, Domed Teacup Beads 4x2mm, Luster Iris - Milky Amethyst (2.5" Tube)
    Project uses 20 piece(s). You will need 1 package(s).

  • FHP-1261 - Nunn Design Head Pin, with Ball Head 2 Inches Long and 20 Gauge Thick Antiqued Gold (10 Pieces)
    Project uses 12 piece(s). You will need 2 package(s).

  • FEA-100 - Nunn Design Earring Findings, Oval Hoop Ear Wire 38x56mm, Antiqued Gold (1 Pair)
    Project uses 1 pair piece(s). You will need 1 package(s).

  • PND-2315 - Charm, Itsy Circle with Lotus Flower 12.8x9.6mm, Antiqued Gold, by Nunn Design (1 Piece)
    Project uses 2 piece(s). You will need 2 package(s).

  • PRES-5810-LAV4 - PRESTIGE Crystal, #5810 Round Pearl Bead 4mm, Lavender (1 Piece)
    Project uses 8 piece(s). You will need 8 package(s).

  • PRES-5328-CGS6 - PRESTIGE Crystal, #5328 Bicone Bead 6mm, Crystal Golden Shadow (1 Piece)
    Project uses 4 piece(s). You will need 4 package(s).

  • PRES-6430-LAM8 - PRESTIGE Crystal, #6430 Round Classic Cut Pendant 8mm, Light Amethyst (1 Piece)
    Project uses 6 piece(s). You will need 6 package(s).

  • FJR-5252 - Gold Tone Brass Open Jump Rings 5mm 20 Gauge (50 pcs)
    Project uses 6 piece(s). You will need 1 package(s).

RECOMMENDED TOOLS:
  • XTL-5032 - The Beadsmith Wire Looping Pliers - Concave And Round Nose
  • XTL-5450 - Xuron Jeweler's Super Fine Pliers Chain Nose Flat Nose
  • XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire (1 Piece)
  • XTL-0020 - Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers
Additional Information
Theme Summer, Spring
Ingredients BCTC-1046, FHP-1261, FEA-100, PND-2315, PRES-5810-LAV4, PRES-5328-CGS6, PRES-6430-LAM8, FJR-5252,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Tip: Save this project to your wishlist to easily return to project instructions.
Czech Glass, Domed Teacup Beads 4x2mm, Luster Iris - Milky Amethyst (2.5
You will need 1 package(s).
1 package = 1 Tube.
$3.17 / Package | SKU: BCTC-1046
Nunn Design Head Pin, with Ball Head 2 Inches Long and 20 Gauge Thick Antiqued Gold (10 Pieces)
You will need 2 package(s).
1 package = 10 Pieces.
$3.85 / Package | SKU: FHP-1261
Nunn Design Earring Findings, Oval Hoop Ear Wire 38x56mm, Antiqued Gold (1 Pair)
You will need 1 package(s).
1 package = 1 Pair.
$7.07 / Package | SKU: FEA-100
Charm, Itsy Circle with Lotus Flower 12.8x9.6mm, Antiqued Gold, by Nunn Design (1 Piece)
You will need 2 package(s).
1 package = 1 Piece.
$1.99 / Package | SKU: PND-2315
PRESTIGE Crystal, #5810 Round Pearl Bead 4mm, Lavender (1 Piece)
You will need 8 package(s).
1 package = 1 Piece.
$0.15 / Package | SKU: PRES-5810-LAV4
PRESTIGE Crystal, #5328 Bicone Bead 6mm, Crystal Golden Shadow (1 Piece)
You will need 4 package(s).
1 package = 1 Piece.
$0.37 / Package | SKU: PRES-5328-CGS6
PRESTIGE Crystal, #6430 Round Classic Cut Pendant 8mm, Light Amethyst (1 Piece)
You will need 6 package(s).
1 package = 1 Piece.
$1.49 / Package | SKU: PRES-6430-LAM8
Gold Tone Brass Open Jump Rings 5mm 20 Gauge (50 pcs)
You will need 1 package(s).
1 package = 50 Pieces.
$2.19 / Package | SKU: FJR-5252
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Wire Looping Pliers - Concave And Round Nose
Xuron Jeweler's Super Fine Pliers Chain Nose Flat Nose
$25.99 / Package | SKU: XTL-5450
Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers
$32.99 / Package | SKU: XTL-0020

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed