Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
- Before you begin, please watch the video on How to Wire Wrap A Briolette.
- Following what you learned in the video, cut a 2 feet length of wire using your flush cutters. Thread it through your lapis pendant and create a "Birds Nest" wire wrap. Snip off any excess wire using your flush cutters.
- Using your chain nose pliers, open a gold plated jump ring and attach it onto the link at the 12" center point of your chain length. Slide on the loop from your wire wrapped pendant and close.
- Next, using your chain nose pliers, open a gold plated jump ring and attach it onto the last link from one side of your 24 inch length chain. Close the jump ring.
- Open another jump ring and slide it onto the last link from your other side of chain; also slide on the loop from your lobster clasp and close.
- That's it!
WHAT YOU'LL NEED: (scroll down for purchase options)
- CHA-99988 - Bright 22K Gold Plated Flat Oval Cable Chain 6mm - Bulk By The Foot
Project uses 24 inches. You will need 2 packages.
- WNT-2433 - Beadsmith Tarnish Resistant Gold Color Copper Wire 24 Gauge 30 Yards (27.4 Meters)
Project uses 24 inches. You will need 1 package.
- FCL-2573 - Bright Gold Plated Lobster Clasps Extra Large 23mm (2)
Project uses 1 piece. You will need 1 package.
- FJR-5250 - 22K Gold Plated Open Jump Rings 5mm 20 Gauge (100)
Project uses 3 pieces. You will need 1 package.
- SPLL-803 - Lapis Lazuli Gemstone Beads, Triangle Focal Pendant 48x58mm, 1 Piece, Blue
Project uses 1 piece. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
- XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose