Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
Don't forget to double these directions to make your matched pair of earrings.
- Take your Krinkle chain and cut the following lengths: 2 pieces that are 6 links long, 2 pieces that are 8 links long, 2 pieces that are 10 links long, 1 piece that is 12 links long.
- Next, place an Austrian crystal crystal bicone in caribbean blue opal onto a gold plated head pin. Create a simple wire loop after the bead and snip off excess with flush cutters. Make a total of 4 of these.
- Take a head pin and snip off the head, try to leave as much wire intact as possible. Create a simple wire loop on one end of your wire. Slide onto the other end of wire 1 Austrian crystal crystal bicone in caribbean blue opal. Create another simple wire loop after the bead and snip off excess wire with flush cutters. Using your chain nose pliers, twist your simple loops so that one is facing left to right and one is facing back to front (so they are oriented in the opposite direction of each other). Create a total of 3 of these.
- Take one of the segments you made in the step above, open the simple wire loop on one end, and slide onto it one of your cut chain link pieces that is 6 links long and one that is 8 links long. Close the loop. Open the loop on the other side and link it to one of the side loops on your gold plated ornate strand reducer. Close the wire loop. Take one of the bicone dangles you made several steps ago and link it to this same loop on the strand reducer (make it so that it hangs off to the side, not towards the middle).
- Repeat the entire previous step but this time connect it to the other side loop of your ornate strand reducer, thus leaving just the middle one with nothing connected to it.
- We will now be using your final segment that has the bicone and 2 simple loops surrounding it. Open one of the loops and place onto it: 1 bicone dangle, 1 cut 10 link chain segment, 1 cut 12 link chain segment, 1 cut 10 link chain segment, and your final bicone dangle. Close the loop back up. Open the simple loop on the other side and connect this to the middle loop on your ornate strand reducer. Close the loop back up.
- Gently twist (like you would a jump ring) the part of the earring hook with the ball on the end and slide your ornate strand reducer onto the hook via the top loop. Position it so that it rests in the front crook of the earring hook. Twist that portion with the ball back in place so that it secures the strand reducer and prevents it from coming off.
- Enjoy!
WHAT YOU'LL NEED: (scroll down for purchase options)
- SWBI-1425 - Austrian Crystal, 5328 Bicone Beads 4mm, 24 Pieces, Caribbean Blue Opal
Project uses 14 pieces. You will need 1 package.
- FEA-4030 - Bali Style 1 Ball Gold Plated Earring Hooks (50)
Project uses 1 pair. You will need 1 package.
- FCO-1531 - 22K Gold Plated Ornate Triple Bead Strand Reducer Connector (x2)
Project uses 2 pieces. You will need 1 package.
- CHA-98831 - Bright Gold Plated Teardrop Krinkle Chain 2mm Bulk By The Foot
Project uses 16 inches. You will need 2 packages.
- FHP-1042 - Head Pins, 1.5 Inches Long and 22 Gauge Thick, 50 Pieces, Gold Tone Brass
Project uses 14 pieces. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
- XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
For closed captions/subtitles, click the CC icon on the video player after starting the video.
Earn Reward Points with your purchase of project components or tools.
