Retired - Art Stone Necklace

PROJECT N7036
Designer: Rachel Zaimont
Skill Level: Intermediate
An asymmetrical bezel creates a sophisticated bed for pigmented concrete, which resembles a natural river stone. Two Austrian crystal framed rhinestones add an artistic flourish.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

In addition to the materials listed above, you will also need a disposable mixing cup, measuring cups to measure tablespoons and teaspoons, tap water, and a popsicle stick to stir the concrete.
  1. First, please watch our video on how to add color pigments to concrete for jewelry.
  2. Based on the instructions in the video, mix your tablespoon of concrete and add in a pinch of the charcoal colored pigment. Rest the bezel on a quarter before pouring the concrete so the loop of the pendant doesn't create an uneven surface. Fill the silver bezel so the concrete level is about halfway up the sides. Let the concrete cure fully before moving on to the next step.
  3. Because of the sloped interior of this bezel, the bezel acts like a mold and the concrete piece will pop out once it cures. Glue it back into the bezel using E6000, and wait a few hours for the glue to dry.
  4. Place a dab of E6000 on the back of one Austrian crystal crystal framed rhinestone flatback and gently press the flatback onto the surface of the concrete near the bottom corner of the bezel. Place some glue onto the back of a second flatback and press it onto the concrete above the first one, as shown in the photo. Allow the glue to dry overnight before moving on to the next step.
  5. Open the clasp of your black satin cord necklace and slide the end without the clasp through the loop at the top of the pendant.
  6. Your necklace is ready to wear!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • XTL-01180 - Create Recklessly, Artist's Concrete for Mixed Media, 8 Ounce Jar
    Project uses 1 piece. You will need 1 package.

  • XTL-01183 - Create Recklessly, Pigment for Artist's Concrete, 1 Ounce, Charcoal
    Project uses 1 piece. You will need 1 package.

  • PND-5890 - DeCoRe Abstract Pendant With Bezel For Epoxy Clay Or Resin 48 x 26mm (1)
    Project uses 1 piece. You will need 1 package.

  • SWCR-1149 - Austrian Crystal, 2078/H Framed Round Flatback Rhinestone 5.2mm, 12 Pieces, Jet Hematite / Silver
    Project uses 2 pieces. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

  • XCR-4404 - Black Satin Rattail Cord Sterling Silver Clasp 3mm / 16 Inches
    Project uses 1 piece. You will need 1 package.

Additional Information
Ingredients XTL-01180, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Create Recklessly, Artist's Concrete for Mixed Media, 8 Ounce Jar
You will need 1 package(s).
1 package = 8 Ounce Jar.
$21.99 / Package | SKU: XTL-01180
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$2.19 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed