Retired - Anastasia Earrings

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Onto a head pin, place 1 Austrian crystal crystal 8mm bicone in air blue opal, 1 sterling silver sparkle bead with clear crystals, and another Austrian crystal crystal 8mm bicone in air blue opal.
2. Create a wrapped wire loop after the last bicone. Cut off excess wire with flush cutters.
3. Open the loop at the base of your earring hook, the same way you would open a jump ring. Place into this open loop the wrapped wire loop you made in the previous step.
4. Close the loop back up.
5. All done!

• BMB-2716 - Sterling Silver Sparkle Bead With Clear Crystals In Ferido - European Style Large Hole (1)
  Project uses 2 pieces. You will need 2 packages.


• FEA-3025 - Silver Plated Long Elegant Earring Hooks (50)
  Project uses 2 pieces. You will need 1 package.


• FHP-5325 - Silver Plated Head Pins 2 Inches/21 Gauge (X50)
  Project uses 2 pieces. You will need 1 package.


• SWC-18094 -
  Project uses 4 pieces. You will need 1 package.

• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex