Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
This necklace measures approximately 20 inches. Alter the length of this strung necklace easily by adding or subtracting the small wood beads and silver heishe beads.
- Begin by cutting a length of beading wire, 24 inches in length. Place a bead stopper at one end.
- String on the beads in the following order: 3 heishe beads, 3 round wood beads, 3 heishe beads, 3 round wood beads, 3 heishe beads, 1 tapered wood bead, 1 heishe bead, 3 amethyst sea glass beads, 1 heishe bead, 1 tapered wood bead, 1 heishe bead, 1 geode bead, 1 hammered flag, 1 geode bead, 1 heishe bead, 1 crystal sea glass bead, 1 heishe bead, 1 geode bead, 1 hammered flag, 1 geode bead, 1 heishe bead, 1 crystal sea glass bead, 1 heishe bead, 1 geode bead, 1 hammered flag, 1 geode bead, 1 heishe bead, 1 crystal sea glass bead, 1 heishe bead, 1 geode bead, 1 hammered flag, 1 geode bead, 1 heishe bead, 1 crystal sea glass bead, 1 heishe bead, 1 geode bead, 1 hammered flag, 1 geode bead, 1 heishe bead, 1 tapered wood bead, 1 heishe bead, 3 amethyst sea glass beads, 1 heishe bead, 1 tapered wood bead, 3 heishe bead, 3 round wood beads, 3 heishe beads, 3 round wood beads, and 3 heishe beads.
- Next string on one crimp tube and thread the wire up through the wire protector and back down the other side. String on the loop of the bar piece of the toggle clasp. Thread the wire back down through the crimp tube. Pull snug and make sure the clasp sits in the loop of the wire protector. Crimp the crimp tube with your pliers. Add a crimp cover over the crimp tube. Trim and excess wire or string it down through a few adjacent beads.
- Move to the beginning side of the necklace, remove the bead stopper and repeat the above step to finish off this side of the necklace. This time adding the other end of the toggle clasp to complete the necklace.
WHAT YOU'LL NEED: (scroll down for purchase options)
- BMB-3602 - TierraCast Fine Silver Plated Pewter Nugget Heishe Beads 5mm (20)
Project uses 32 pieces. You will need 2 packages.
- BGL-9920 - Cultured Sea Glass, Small Nugget Beads 8-16mm, 7 Pieces, Crystal
Project uses 4 pieces. You will need 1 package.
- BGL-9930 - Cultured Sea Glass, Small Nugget Beads 8-16mm, 7 Pieces, Medium Amethyst Purple
Project uses 6 pieces. You will need 1 package.
- FCL-1753 - TierraCast Maker's Collection, Maker's Toggle Clasp Set, Silver Tone
Project uses 1 piece. You will need 1 package.
- XCR-1233 - BeadSmith Flex-Rite Beading Wire, 49 Strand .018 Thick, 30 Foot Spool, Clear
Project uses 24 Inches. You will need 1 package.
- FCR-1715 - BeadSmith Crimp Tubes, 2x2mm, 100 Pieces, Silver Plated
Project uses 2 pieces. You will need 1 package.
- BWD-1046 - EuroWood Natural Wood Beads, Tapered Oval Tubes 20mm Long, 50 Pieces, Multi-Colored
Project uses 4 pieces. You will need 1 package.
- BWD-1016 - EuroWood Natural Wood Beads, Round 4mm Diameter, 250 Pieces, Natural
Project uses 12 pieces. You will need 1 package.
- FCR-1070 - Silver Plated Stardust Sparkle Crimp Bead Covers 4mm (144)
Project uses 2 pieces. You will need 1 package.
- FCR-4160 - Silver Plated Wire & Thread Protectors .019 Inch Loops (50)
Project uses 2 pieces. You will need 1 package.
- BMB-235- TierraCast Baule Bead, Hammered Triangle Flag 10x13mm, 2 Pieces, White Bronze Plated
Project uses 5 pieces. You will need 3 packages.
- SPGEO-201 - Dakota Stones Gemstone Beads, Natural Agate Geode Druzy, Round 12mm, 15.8 Inch Strand, Iridescent White
Project uses 10 pieces. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5608 - Xuron 4 In 1 Crimping Pliers - Works On 1, 2 And 3mm Crimps!
- XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
- XTL-3000 - Bead Stopper- Stop Beads Sliding Off Stringing Material