Retired - Eureka Necklace

PROJECT N8075
Designer: Alexandra Smith
Skill Level: Beginner
A rich cache of faceted nugget charms by Nunn Design are graduated along antiqued silver cable chain in this flattering mixed metal necklace.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

These instructions will make a 17 inch necklace. To adjust the size, choose your desired length of chain.
  1. Begin by using flush cutters to cut 15.5 inches of 3mm cable chain.
  2. Use pliers to open a 4mm jump ring, and attach the loop of your 13mm copper charm to the centermost link of your cable chain. Close the jump ring.
  3. Open another jump ring, and attach one 9mm silver charm onto your chain, six links to one side of your copper charm. Close the jump ring. Repeat this step to hang another silver charm on the opposite side of your necklace.
  4. Repeat the above step, this time attaching two 6mm gold charms, spaced six links from each of your silver charms.
  5. Now open another jump ring, and attach the loop of your lobster clasp onto one end of your necklace. Close the jump ring. Open one more jump ring, and attach it to the the opposite end of your necklace. Close the jump ring.
  6. Enjoy!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • PND-385 - Metal Charm, Flat Back Faceted Circle 13mm, Antiqued Copper, 1 Piece, by Nunn Design
    Project uses 1 piece. You will need 1 package.

  • PND-394 - Metal Charm, Faceted Circle 6mm, Antiqued Gold, 2 Pieces, by Nunn Design
    Project uses 2 pieces. You will need 1 package.

  • PND-391 - Metal Charm, Flat Back Faceted Circle 9mm, Antiqued Silver, 2 Pieces, by Nunn Design
    Project uses 2 pieces. You will need 1 package.

  • CHA-9664 - Antiqued Silver Plated Cable Chain, 3mm, by the Foot
    Project uses 15.5 inches. You will need 2 packages.

  • FCL-2525 - Antiqued Silver Plated Curved Lobster Claw Clasps 10mm/6
    Project uses 1 piece. You will need 1 package.

  • FJR-5141 - Antiqued Silver Plated Open Jump Rings 4mm 21 Gauge (50)
    Project uses 7 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
  • XTL-0020 - Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers
  • XTL-0023 - Baby Wubbers Quality Fine Bent Chain Nose Jeweller's Pliers
  • XTL-9920 - Beadaholique Bead Mat, 12.5x9.25 Inches, 1 Piece
Additional Information
Theme Vintage Look, Boho
Ingredients CHA-9664, FCL-2525, FJR-5141,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Antiqued Silver Plated Cable Chain, 3mm, by the Foot
You will need 2 package(s).
1 package = By The Foot.
$3.25 / Package | SKU: CHA-9664
Lobster Clasps, Curve 10mm, Antiqued Silver Plated (6 Pieces)
You will need 1 package(s).
1 package = 6 Pieces.
$4.15 / Package | SKU: FCL-2525
You will need 1 package(s).
1 package = .
/ Package | SKU: FJR-5141
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers
$32.99 / Package | SKU: XTL-0020
Baby Wubbers Quality Fine Bent Chain Nose Jeweller's Pliers
Beadsmith Beading Mat, 12.5x9.25 Inches (1 Piece)
$7.97 / Package | SKU: XTL-9920

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed