Botanical Crescent Necklace

Name: Botanical Crescent Necklace
Brand: Beadaholique
SKU: N8077
Availability: InStock

PROJECT N8077

Designer: Alexandra Smith

Skill Level: Intermediate

Save to Wishlist

Printer Friendly PDF
(if available)

A subtle golden glow radiates from this eclipse flat tag pendant, overlaid with pressed organics sealed in resin.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

In addition to the materials listed, you will also need: pressed organics, gloves, a face mask, toothpicks, and a heat source such as a lighter or small torch. Be sure to cover your work surface when using resin. These instructions will make a 17 inch necklace. To modify the size, adjust the lengths of rolo chain on either side accordingly.

Please watch the video: How to Use Nunn Design Resin to Seal Pressed Organics onto Flat Tags for Jewelry.
Set up your flat tag in a well-ventilated and dust-free area.
Put on your face mask and disposable gloves. Based on the technique shown in the video, mix the resin in a mixing cup and stir with a craft stick gently until all striations are gone.
Following the technique shown in the video, prepare your organics and position them onto the flat tag. Then use a toothpick to apply the desired amount of resin to the entire surface of the flat tag. Remove any air bubbles with a heat source such a small torch. Let the resin harden and cure for three days before proceeding.
To hang your pendant: Use flush cutters to cut a 7.75 inch length of rolo chain. Open a 6.5mm jump ring and attach the hole on one side of your flat tag to one end of your chain. Close the jump ring. Repeat this step to attach chain to the opposite side of your necklace.
Open another jump ring, and attach your lobster clasp to one side of your necklace. Close the jump ring. Open one more jump ring and attach it to the other side of your necklace. Close the jump ring. All done!

WHAT YOU'LL NEED: (scroll down for purchase options)

PND-0393 - Nunn Design Flat Tag Pendant Link, Blank Circle Eclipse 30mm, 1 Piece, Antiqued Gold Plated
Project uses 1 piece. You will need 1 package.

FCL-7521 - Nunn Design Antiqued 24kt Gold Plated Lobster Clasps 12mm (2)
Project uses 1 piece. You will need 1 package.

FJR-4217 - Nunn Design Jump Ring, Bark Textured Open 16 Gauge, 6.5mm, 10 Pieces, Antiqued Gold
Project uses 4 pieces. You will need 1 package.

CHA-9969 - Matte Gold Plated Rolo Chain 3mm by the Foot
Project uses 15.5 inches. You will need 2 packages.

TRC-14 - Nunn Design 2-Part Epoxy Resin Kit, Jewelers Grade Clear, 8 Oz Kit
Project uses 1 kit. You will need 1 package.

RECOMMENDED TOOLS:

XTL-100 - Micro Grip Pliers, Side Cutters, 4.5 Inches Long, 1 Piece
XTL-101 - Micro Grip Pliers, Long Chain Nose, 5 Inches Long, 1 Piece
XTL-103 - Micro Grip Pliers, Bent Chain Nose, 5 Inches Long, 1 Piece

Additional Information

Theme	Vintage Look, Spring, Boho
Ingredients	PND-0393, FCL-7521, FJR-4217, CHA-9969, TRC-14,

Useful Techniques & Learning Guides

How to Open and Close a Jump Ring
Intro to Beading 101: Getting Started with Jewelry Making
Mixed Media 101: Creating Mixed Media Jewelry
Product Guide: Using Gold in Jewelry
Resin 101: Tips and Tricks for Creating Resin Mixed Media Jewelry

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Tip: Save this project to your wishlist to easily return to project instructions.

Nunn Design Flat Tag Pendant Link, Blank Circle Eclipse 30mm, Antiqued Gold Plated (1 Piece)

            Nunn Design Flat Tag Pendant Link, Blank Circle Eclipse 30mm, Antiqued Gold Plated (1 Piece)
        
You will need 1 package(s).
1 package = 1 Piece.

                $7.59
            
             / Package | SKU: PND-0393

Nunn Design Lobster Clasps, Curve 12mm, 24K Antiqued Gold Plated (2 Pieces)

            Nunn Design Lobster Clasps, Curve 12mm, 24K Antiqued Gold Plated (2 Pieces)
        
You will need 1 package(s).
1 package = 2 Pieces.

                $2.59
            
             / Package | SKU: FCL-7521

Nunn Design Jump Ring, Bark Textured Open 16 Gauge, 6.5mm Antiqued Gold (10 Pieces)

            Nunn Design Jump Ring, Bark Textured Open 16 Gauge, 6.5mm Antiqued Gold (10 Pieces)
        
You will need 1 package(s).
1 package = 10 Pieces.

                $2.79
            
             / Package | SKU: FJR-4217

Sold out

Matte Gold Plated Rolo Chain 3mm by the Foot

            Matte Gold Plated Rolo Chain 3mm by the Foot
        
You will need 2 package(s).
1 package = By the Foot.

                $3.47
            
             / Package | SKU: CHA-9969

Nunn Design 2-Part Epoxy Resin Kit, Jewelers Grade Clear, 8 Oz Kit

            Nunn Design 2-Part Epoxy Resin Kit, Jewelers Grade Clear, 8 Oz Kit
        
You will need 1 package(s).
1 package = 8 oz..

                $56.85
            
             / Package | SKU: TRC-14