Retired - Peacock Pearl Necklace

Name: Retired - Peacock Pearl Necklace
Brand: Beadaholique
SKU: N2269
Availability: InStock

PROJECT N2269

Designer: Kat Silvia

Skill Level: Intermediate

Save to Wishlist

Printer Friendly PDF
(if available)

A classic strand of knotted pearls is a wardrobe staple. These beautiful iridescent pearls give a little extra elegance to any outfit.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

This necklace measures 18.5 inches. For a longer or shorter necklace simply adjust the number of pearls strung. Please note for a longer necklace you will need to purchase an additional strand of pearls.

Begin by threading the griffin silk up and over the thread protector leaving a tail of about 2 inches. Slide on one closed jump ring and then tie a double overhand knot as close as you can to the base of the thread protector. Add a dab of GS Hypo cement to the knot. Trim the short tail and add a crimp cover.
Next you will begin the pearl knotting as seen in our video: How to Do Pearl Knotting Using Tweezers. For this design, I recommend a double knot in between each pearl for added bulk.
Finally, finish the other side the same as the beginning. This time sliding on one lobster clasp before completing the knot.

WHAT YOU'LL NEED: (scroll down for purchase options)

XCR-9402 - Griffin Silk Beading Cord & Needle Size 4 Jet Black
Project uses 1 Strand. You will need 1 package.

PRL-210 - Cultured Pearl Beads, Round 10-12mm, 16 Inch Strand, Iridescent Blue
Project uses 1 Strand. You will need 1 package.

FCR-4165 - Silver Plated Wire & Thread Protectors .024 Inch Loops (50)
Project uses 2 pieces. You will need 1 package.

FCL-1144 - TierraCast Brass, Lobster Clasps 15x9mm, 4 Pieces, Silver Plated
Project uses 1 piece. You will need 1 package.

FCR-1054 - Shiny Silver Tone Crimp Bead Covers 4mm (x144)
Project uses 2 pieces. You will need 1 package.

FJR-4121 - Silver Plated Closed Jump Rings 6mm 18 Gauge (20)
Project uses 1 piece. You will need 1 package.

XTL-1001 - G S Hypo Cement Precise Applicator Essential!
Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
XTL-0373 - Tulip Premium Scissors, Gold Handle 5 Inch, 1 Pair
XTL-4001 - Beadsmith Bent Fine Point Tweezers For Bead And Pearl Knotting

Additional Information

Theme	Summer
Ingredients	XCR-9402, FCR-4165, FCL-1144, FCR-1054, FJR-4121, XTL-1001,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

Griffin Silk Beading Cord & Needle Size 4 Jet Black

            Griffin Silk Beading Cord & Needle Size 4 Jet Black
        
You will need 1 package(s).
1 package = 1 Card.

                $2.29
            
             / Package | SKU: XCR-9402

Wire & Thread Protectors, .024 Inch Loops Silver Plated (50 Pieces)

            Wire & Thread Protectors, .024 Inch Loops Silver Plated (50 Pieces)
        
You will need 1 package(s).
1 package = 50 Pieces.

                $3.47
            
             / Package | SKU: FCR-4165

            
You will need 1 package(s).
1 package = .

             / Package | SKU: FCL-1144

Crimp Bead Covers, 4mm, Silver Tone (144 Pieces)

            Crimp Bead Covers, 4mm, Silver Tone (144 Pieces)
        
You will need 1 package(s).
1 package = 144 Pieces.

                $18.35
            
             / Package | SKU: FCR-1054

Sold out

Silver Plated Closed Jump Rings 6mm 18 Gauge (20 pcs)

            Silver Plated Closed Jump Rings 6mm 18 Gauge (20 pcs)
        
You will need 1 package(s).
1 package = 20 Pieces.

                $2.69
            
             / Package | SKU: FJR-4121

G S Hypo Cement Precise Applicator Essential!

            G S Hypo Cement Precise Applicator Essential!
        
You will need 1 package(s).
1 package = 1 Tube.

                $7.29
            
             / Package | SKU: XTL-1001

Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

$6.49 / Package | SKU: XTL-5511

Tulip Premium Scissors, Gold Handle 5-Inch

$29.15 / Package | SKU: XTL-0373

The Beadsmith Bent Fine Point Tweezers For Bead And Pearl Knotting

$4.17 / Package | SKU: XTL-4001

Sold out

You recently viewed

Clear recently viewed

1 second ago