Cape Coral Bracelet (Reboot)

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Before you begin please watch our video: How to Braid Beaded Kumihimo and Make a Bracelet. Now follow the instructions below to set up your disc.
2. Cut 8 cords, 4 feet each, of the coral color. Gather all the ends and tie an overhand knot with all the strands. Take the gator weight and clamp it to the knot. Thread it down through the hole of the kumihimo disc. Place the cords on either side of the dots as shown in the video.
3. Before you set up your beads, please see our quick tip video for how you can use Super New Glue to form a needle for easy stringing. Allow the glue to dry then add 72 matte red ab beads onto each strand.
4. Wind your bobbins as seen in the video.
5. Begin your braiding by starting with about 1 inch of braiding before adding the beads. Once you have braided all the beads, finish with 1 inch of braiding.
6. Take the cords off of the disc and tie an overhand knot at the ends. You can now set this braid aside.
7. Repeat the above process with the teal cord and turquoise beads.
8. Once you have both braids, please watch our video: How to Make a Single Square Knot For Beaded Kumihimo.
9. For the clasp, you will be "building up" the end braid with a scrap of cord. You can see a similar example of this at the end of this video here: How to Make the Deluxe Beaded Kumihimo Bracelet Kit. Separate the magnetic clasp before gluing the ends in.
10. Build up the end with a piece of cord by winding it around the braided portion and tying an overhand knot. Trim the end to fit into the well of the clasp. Add a dab of glue and place into the well. You have two braid ends to glue into each side of the clasp so make sure that you are allowing enough space to fit in there.
11. Please allow to dry unclasped and for at least 24 hours before wearing.

• DMRR-0407FR - Miyuki Round Seed Beads, 11/0 Size, 8.5 Gram Tube, 407FR Matte Red AB
  Project uses 1 Tube. You will need 1 package.


• DMRR-2050 - Miyuki Round Seed Beads, 11/0 Size, 8.5 Gram Tube, 2050 Special Dyed Bright Turquoise
  Project uses 1 Tube. You will need 1 package.


• FCL-1681 - Regaliz Findings, Round 2-Strand Magnetic Clasp Fits 5mm Round Cord, 1 Set, Antiqued Silver
  Project uses 1 piece. You will need 1 package.


• XTL-1059 - Eurotool Super New Glue - Heavy Duty Adhesive - 3 Gram Bottle
  Project uses 1 piece. You will need 1 package.


• XCR-4611 - BeadSmith Super-Lon (S-Lon) Cord - Size 18 Twisted Nylon - Teal (77 Yard Spool)
  Project uses 1 Spool. You will need 1 package.


• XCR-4329 - BeadSmith Super-Lon (S-Lon) Cord - Size 18 Twisted Nylon - Chinese Coral / 77 Yards
  Project uses 1 Spool. You will need 1 package.

• XTL-6113 - Lightweight Kumihimo Round Mini Disc Disk For Japanese Braiding and Cording
• XTL-6063 - Gator Weight For Kumihimo Braiding - 1.6 Ounces (1)
• XTL-6103 - Beadsmith No Tangle Flexible Plastic Thread Bobbins For Kumihimo Or Macrame 1 7/8 Inch (8 Pack)
• XTL-5700 - Fiskars 5 Precision Tip Scissors - Super Sharp