Retired - Wire Spiral Christmas Tree Earrings

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Start by watching the video: How to Make Wire Spiral Christmas Tree Earrings.
2. Based upon what you learned in the video, make your spiral. Set aside.
3. Place onto a red head pin: one 4mm gold bicone, one 6mm red bicone, one 4mm gold bicone, one 6mm red bicone, one 4mm gold bicone, one 6mm red bicone, and another 4mm gold bicone.
4. Take your head pin with beads and slip it through the middle of your spiral so that the top part of the spiral rests on the last gold bicone. Create a simple wire loop after the bicone.
5. Open the loop at the base of your earring hook (the same way you would open a jump ring) and connect it to the simple wire loop you just made. Close the loop.
6. Happy Holidays!

• FEA-9967 - Bright Red Color Brass 15mm Fish Hook Earring Hooks (5 Pairs)
  Project uses 2 pieces. You will need 1 package.


• FHP-9029 - Bright Red Color Brass - Head Pins 2 Inch 21 Gauge (25)
  Project uses 2 pieces. You will need 1 package.


• WCR-2213 - Artistic Wire, Silver Plated Craft Wire 22 Gauge Thick, 8 Yard Spool, Christmas Green
  Project uses 20 inches. You will need 1 package.


• BCZ-5410 - Preciosa Czech Crystal 4mm Bicone Beads 'Crystal Aurum' (50)
  Project uses 8 pieces. You will need 1 package.


• BCZ-5685 - Preciosa Czech Crystal Beads 6mm Bicone Light Siam Red (20)
  Project uses 6 pieces. You will need 1 package.

• XTL-9029 - Beadsmith Multi Right Angle Wire Mandrel - Wire Looping Tool - 4 Shapes / 48 Sizes
• XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex