Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
These instructions will give you a necklace that hangs at about 24 inches. Simply adjust the length of chain used to modify the length.
- Cut two lengths of chain 10 inches each. Cut a length of chain 1 inch. Cut another length of 1 3/4 inch. Set these aside.
- Take one pinch bail and pinch it around the snowflake pendant so it is secure. Set aside.
- Take one head pin and string on one 14mm flower margarita bead, one 12mm flower margarita bead, one 10mm flower margarita bead, one 8mm flower margarita bead, and one 5mm bicone bead. Make a simple wire loop. Open the simple wire loop, same as you would a jump ring, and attach it to the length of chain that is 1 3/4 inches in length. Close the loop. Set this aside.
- Open one jump ring and attach it to the pave star pendant. Attach the length of chain that is 1 inch. Close the jump ring. Set this aside.
- Take the Nunn Design Open Frame Pendant and slip on the loop of the pinch bail with the snowflake on it.
- Open one jump ring and attach the chain with the star pendant on it to the right of the snowflake bail around the open frame. Close the jump ring.
- Open one jump ring and attach the chain with the tree on it to the left of the snowflake bail around the open frame. Close the jump ring.
- Open one jump ring and attach one length of 10 inch chain to the hole on one side of the open frame pendant. Close the jump ring. Repeat on the other side.
- To the end of left side chain open jump ring and attach one lobster clasp to the chain. Close the jump ring.
- To the end of right side chain open jump ring and attach it to the chain. Close the jump ring.
WHAT YOU'LL NEED: (scroll down for purchase options)
- SWC-9555 - Austrian Crystal, 3700 Flower Margarita Beads 14mm, 4 Pieces, Emerald AB
Project uses 1 piece. You will need 1 package.
- SWC-9811 - Austrian Crystal, 3700 Flower Margarita Beads 12mm, 4 Pieces, Emerald AB
Project uses 1 piece. You will need 1 package.
- SWC-87081 - Austrian Crystal, 3700 Crystal Flower Margarita Beads 10mm, 6 Pieces, Emerald AB
Project uses 1 piece. You will need 1 package.
- SWC-85081 - Austrian Crystal, 3700 Crystal Flower Margarita Beads 8mm, 12 Pieces, Emerald AB
Project uses 1 piece. You will need 1 package.
- SWBB-1501 - Austrian Crystal, 5328 Bicone Beads 5mm, 20 Pieces, Crystal AB
Project uses 1 piece. You will need 1 package.
- SWCR-6215 - Austrian Crystal, 67422 Pave Star Pendant 14mm, 1 Piece, Crystal Moonlight / White Opal
Project uses 1 piece. You will need 1 package.
- SWC-8381 - Austrian Crystal, 6704 Snowflake Pendant 20mm, 1 Piece, Crystal AB
Project uses 1 piece. You will need 1 package.
- PND-08329 - Nunn Design Open Frame Pendant, Pear Shape 34.5x22.5mm, 2 Pieces, Silver Plated
Project uses 1 piece. You will need 1 package.
- CHA-9812 - Nunn Design Silver Plated Oval Cable Chain 2.3mm - By The Ft
Project uses 23 pieces. You will need 2 packages.
- FJR-3911 - Silver Plated Open Jump Rings 4mm 20 Gauge (50)
Project uses 7 pieces. You will need 1 package.
- FCL-2528 - Silver Plated Sleek Lobster Claw Clasps 9mm (10)
Project uses 1 piece. You will need 1 package.
- FCO-4002 - Beadalon Silver Plated 4mm Slider Pinch Bail For Gemstone & Crystal Pendants (6)
Project uses 1 piece. You will need 1 package.
- FHP-5323 - Silver Plated Head Pins 1.5 Inches Long/21 Gauge (x50)
Project uses 1 piece. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
- XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
- XTL-5032 - Beadsmith Wire Looping Pliers - Concave And Round Nose
- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex