White Howlite Ladder Chain Bracelet

Name: White Howlite Ladder Chain Bracelet
Brand: Beadaholique
SKU: B2408
Availability: OutOfStock

PROJECT B2408

Designer: Kat Silvia

Skill Level: Intermediate

Save to Wishlist

Printer Friendly PDF
(if available)

Surrounding beautiful White Howlite gemstone beads is a gold plated bar chain that gives structure and offers a lovely design element in this bracelet.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

These instructions will give you a bracelet that is 6.5 inches. To adjust the length, simply modify the length of chain needed.

Begin by stringing one gemstone onto one eye pin. Make a simple wire loop. Set aside. Repeat this step five more times.
Take the chain, and separate it so that you have two lengths of 7 bars. You can open the link, the same way you would a jump ring to separate them without cutting a link.
Take one eye pin with a gemstone on it and open one loop, same as you would a jump ring, and attach it to the center link between two bars of chain. Close the loop. Repeat this for the bottom of this eye pin. (See photo for reference). You will repeat this step for the remaining gemstones moving across the chain.
To one end, open one jump ring and attach one side of the magnetic clasp to the two end links. Close the jump ring. Repeat on the other side to finish the clasp.

WHAT YOU'LL NEED: (scroll down for purchase options)

SPHO-100 - Howlite Gemstone Beads, Round 10mm, 14.75 Inch Strand, White and Black
Project uses 6 pieces. You will need 1 package.

CHA-0136 - Gold Plated Long & Short Beaded Chain, Long Tube Links, 5x12mm, by the Foot
Project uses 14 inches. You will need 2 packages.

FHP-6257 - 22K Gold Plated Open Eye Pins 22 Gauge 1.5 Inch (x50)
Project uses 6 pieces. You will need 1 package.

FJR-5452 - 22K Gold Plated Open Jump Rings 4mm 22 Gauge (50)
Project uses 2 pieces. You will need 1 package.

FCL-6682 - 22K Gold Plated Magnetic Clasps 6mm x 8mm (3)
Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5032 - Beadsmith Wire Looping Pliers - Concave And Round Nose
XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Additional Information

Theme	Summer
Ingredients	SPHO-100, CHA-0136, FHP-6257, FJR-5452, FCL-6682,

Useful Techniques & Learning Guides

How to Create a Simple Wire Loop
How to Open and Close a Jump Ring

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Tip: Save this project to your wishlist to easily return to project instructions.

            
You will need 1 package(s).
1 package = .

             / Package | SKU: SPHO-100

Gold Plated Long & Short Beaded Chain, Long Tube Links, 5x12mm, by the Foot

            Gold Plated Long & Short Beaded Chain, Long Tube Links, 5x12mm, by the Foot
        
You will need 2 package(s).
1 package = By the Foot.

                $11.89
            
             / Package | SKU: CHA-0136

            
You will need 1 package(s).
1 package = .

             / Package | SKU: FHP-6257

22K Gold Plated Open Jump Rings 4mm 22 Gauge (50 pcs)

            22K Gold Plated Open Jump Rings 4mm 22 Gauge (50 pcs)
        
You will need 1 package(s).
1 package = 50 Pieces.

                $3.07
            
             / Package | SKU: FJR-5452

Magnetic Clasps, Round 8x6mm 22K Gold Plated (3 Set)

            Magnetic Clasps, Round 8x6mm 22K Gold Plated (3 Set)
        
You will need 1 package(s).
1 package = 3 Sets.

                $10.15
            
             / Package | SKU: FCL-6682