Retired - Watercolor Blooms Ring

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Begin by selecting an image from a 24 x 48mm rectangle Japanese Motif collage sheet. Rough cut around your chosen image.
2. Watch the video: How to Make a Keepsake Photo Pendant. Follow the instructions in the video to affix your 25mm square glass domed tile onto your image using Diamond Glaze adhesive. Disregard the end of the video with shows you how to glue your pendant into a setting.
3. Make sure you allow your project to dry thoroughly and then trim around the tile.
4. Watch the video: How to Use Velour Paper to Finish Glass Tile Jewelry. Affix the velour paper to the back of your tile in the same manner as the image. Allow to dry thoroughly and trim around the tile.
5. Apply a small amount of E6000 adhesive to the glue on pad on an antique silver plated adjustable ring. With your tile face down, center the glue on pad over the ring and press into place firmly.
6. Allow all adhesives to dry for at least 24 hours before wearing.

• BGL-9054 - Clear Glass Cabochon Square Dome Bead Crystal Magnify 25mm (4)
  Project uses 1 piece. You will need 1 package.


• FRG-0724 - Nunn Design Antiqued Silver Plated Pewter 16mm Round Glue-On Adjustable Ring
  Project uses 1 piece. You will need 1 package.


• XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
  Project uses 1 piece. You will need 1 package.


• XTL-7980 - BeadSmith Velour Paper - Create Backings On Glass Tiles & Cabochon Pieces
  Project uses 1 piece. You will need 1 package.


• XTL-1020 - JudiKins Diamond Glaze Water Based Adhesive (2 Fl. Oz.)
  Project uses 1 bottle. You will need 1 package.

• XTL-5700 - Fiskars 5 Precision Tip Scissors - Super Sharp