Retired - Urban Ball Necklace - Gunmetal

Retired - Urban Ball Necklace - Gunmetal

Name: Retired - Urban Ball Necklace - Gunmetal
Brand: Beadaholique
SKU: N743
Availability: OutOfStock

PROJECT N743

Designer: Julie Bean

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF
(if available)

This simple long necklace is one of those accessories that will go with just about every outfit and the pave crystal bead at the base has just enough sparkle to have your friends saying 'that is so cool!'

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

This necklace is quite long, 36". If you want a shorter necklace, just cut your chain accordingly before you begin this project.
Place onto a head pin 1 bead cap facing upwards and 1 Beadelle pave crystal bead. After the bead, create a wrapped wire loop. NOTE: Make sure your wrapped wire loop is large enough to thread your chain through in the next step.
Thread one end of your chain through the wrapped wire loop you just made.
On one end of your chain, open and connect a 4mm jump ring. Before closing the jump ring, also link onto it a 6mm closed jump ring. Close the jump ring.
On the other side of the chain, open and connect another 4mm jump ring. Before closing this jump ring, also link onto it your lobster clasp. Close the jump ring.
All done!

WHAT YOU'LL NEED: (scroll down for purchase options)

BMB-7040 - Gun Metal Plated Corrugated Bead Caps - 3.5mm Diameter (100)
Project uses 1 piece. You will need 1 package.

CHA-9615 - Gunmetal Brass Fine Cable Chain 1.3mm Bulk By The Foot
Project uses 36 inches. You will need 3 packages.

BDLL-3351 - Beadelle Crystal 10mm Round Pave Bead Lg Hole Gunmetal Plated / Crystal (1 Pc)
Project uses 1 piece. You will need 1 package.

FCL-2511 - Gunmetal Plated Curved Lobster Clasps 8mm (10)
Project uses 1 piece. You will need 1 package.

FJR-5294 - Gun Metal Plated Open Jump Rings 4mm 21 Gauge (100)
Project uses 2 pieces. You will need 1 package.

FJR-4042 - Gun Metal Plated Closed Jump Rings 6mm 21 Gauge (20)
Project uses 1 piece. You will need 1 package.

FHP-06319 - Gun Metal Plated Head Pins - 21 Gauge 3 Inches (25)
Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex

Additional Information

Theme	Special Occasion
Ingredients	FCL-2511, FJR-5294, FHP-06319,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

Lobster Clasps, Curve 10mm, Gunmetal Plated (10 Pieces)

            Lobster Clasps, Curve 10mm, Gunmetal Plated (10 Pieces)
        
You will need 1 package(s).
1 package = 10 Pieces.

                $9.29
            
             / Package | SKU: FCL-2511

            
You will need 1 package(s).
1 package = .

             / Package | SKU: FJR-5294

Head Pins, 3 Inches Long and 21 Gauge Thick, Gunmetal Plated (25 Pieces)

            Head Pins, 3 Inches Long and 21 Gauge Thick, Gunmetal Plated (25 Pieces)
        
You will need 1 package(s).
1 package = 25 Pieces.

                $2.49
            
             / Package | SKU: FHP-06319