Retired - Twilight Falls Necklace

PROJECT N2079
Designer: Kat Silvia
Skill Level: Beginner
Sparkling in the evening sky, this strung necklace features Vintage beads and Czech Glass Fire Polish beads.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

These instructions will give you a necklace that is 22 inches in length. To modify the length, simply adjust the number of Czech Fire Polish Beads used on each end of the necklace, respectively.
  1. Cut 28 inches of beading wire. String on one crimp tube and one closed jump ring. Thread the wire back through the crimp tube forming a loop about 2 inches from one end. Pull snug. Crimp the crimp tube. Trim the wire with your flush cutters. Cover with a crimp cover.
  2. Begin stringing the beads in this order: Seven 6mm crystal beads, five 8mm alexandrite beads, one vintage star bead, one 8mm alexandrite bead, one vintage star bead, one 8mm alexandrite bead, one vintage star bead, one 8mm alexandrite bead, one vintage star bead, one 8mm alexandrite bead, one vintage star bead, one 8mm alexandrite bead, one vintage blue marble bead, one 6mm crystal bead, one vintage blue marble bead, one 6mm crystal bead, one vintage blue marble bead, one 6mm crystal bead, one vintage blue marble bead, one 6mm crystal bead, one vintage blue marble bead, one 8mm alexandrite bead, one vintage star bead, one 8mm alexandrite bead, one vintage star bead, one 8mm alexandrite bead, one vintage star bead, one 8mm alexandrite bead, one vintage star bead, one 8mm alexandrite bead, one vintage star bead, five 8mm alexandrite beads, and Seven 6mm crystal beads.
  3. String on one crimp tube and one closed jump ring. Thread the wire back through the crimp tube forming a loop. Pull snug, but leaving enough space for the necklace to hang nicely. Crimp the crimp tube. Trim the wire with your flush cutters. Cover with a crimp cover.
  4. Open one jump ring, attach it to one closed jump ring. Close the jump ring.
  5. Open another jump ring and attach it to the other closed jump ring and to one lobster clasp. Close the jump ring.
  6. All done!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • BPL-2088 - Vintage German Lucite, Large Hole Round Beads with Stars 18mm, 9 Pieces, Matte Crystal / Silver
    Project uses 10 pieces. You will need 2 packages.

  • BPL-2089 - Vintage German Lucite, Smooth Round Beads 20mm, 8 Pieces, Blue Tone
    Project uses 7 pieces. You will need 1 package.

  • BCP-3895 - Czech Fire Polished Glass Beads 8mm Round Alexandrite (25)
    Project uses 20 pieces. You will need 1 package.

  • BCP-3602 - Czech Fire Polished Glass Beads 6mm Round 'Crystal Luster' (25)
    Project uses 20 pieces. You will need 1 package.

  • FCL-7523 - Nunn Design Silver Plated Lobster Clasps 12mm (2)
    Project uses 1 piece. You will need 1 package.

  • FJR-4023 - Silver Plated Closed Jump Rings 4mm 20 Gauge (20)
    Project uses 2 pieces. You will need 1 package.

  • FCR-1075 - Silver Filled Anti Tarnish Crimp Bead Covers 3mm (20)
    Project uses 2 pieces. You will need 1 package.

  • FCR-1715 - BeadSmith Crimp Tubes, 2x2mm, 100 Pieces, Silver Plated
    Project uses 2 pieces. You will need 1 package.

  • FJR-5140 - Silver Plated Open Jump Rings 4mm 21 Gauge Thick (100)
    Project uses 2 pieces. You will need 1 package.

  • XCR-5193 - Soft Flex, 49 Strand Medium Beading Wire .019 Inch Thick, 30 Feet, Satin Silver
    Project uses 28 Inches. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5608 - Xuron 4 In 1 Crimping Pliers - Works On 1, 2 And 3mm Crimps!
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5450 - Xuron Jeweler's Super Fine Pliers Chain Nose Flat Nose
Additional Information
Ingredients BCP-3895, BCP-3602, FCL-7523, FJR-4023, FCR-1075, FCR-1715, FJR-5140, XCR-5193,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Czech Fire Polished Glass Beads 8mm Round Alexandrite (1 Strand)
You will need 1 package(s).
1 package = 1 Strand.
$3.67 / Package | SKU: BCP-3895
Czech Fire Polished Glass Beads 6mm Round 'Crystal Luster' (25 pcs)
You will need 1 package(s).
1 package = 25 Pieces.
$1.89 / Package | SKU: BCP-3602
Nunn Design Lobster Clasps, Curve 12mm, Silver Plated (2 Pieces)
You will need 1 package(s).
1 package = 2 Pieces.
$2.19 / Package | SKU: FCL-7523
Silver Plated Closed Jump Rings 4mm 20 Gauge (20 pcs)
You will need 1 package(s).
1 package = 20 Pieces.
$2.39 / Package | SKU: FJR-4023
You will need 1 package(s).
1 package = .
/ Package | SKU: FCR-1075
The Beadsmith Crimp Beads, Tube 2x2mm, Silver Plated (100 Pieces)
You will need 1 package(s).
1 package = 100 Pieces.
$1.99 / Package | SKU: FCR-1715
Silver Plated Open Jump Rings 4mm 21 Gauge Thick (100 pcs)
You will need 1 package(s).
1 package = 100 Pieces.
$2.39 / Package | SKU: FJR-5140
Soft Flex, 49 Strand Medium Beading Wire .019 Inch Thick, Satin Silver (30 Feet)
You will need 1 package(s).
1 package = 1 Spool.
$19.99 / Package | SKU: XCR-5193
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Xuron 4 In 1 Crimping Pliers - Works On 1, 2 And 3mm Crimps!
Xuron Jeweler's Super Fine Pliers Chain Nose Flat Nose
$25.99 / Package | SKU: XTL-5450

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed