Click or scroll to zoom
Tap or pinch to zoom
Retired - Turquoise Charmer Bracelet
Click or scroll to zoom
Tap or pinch to zoom
Retired - Turquoise Charmer Bracelet
Retired - Turquoise Charmer Bracelet

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Retired - Turquoise Charmer Bracelet

Special Value
PROJECT B2375
Designer: Kat Silvia
Skill Level: Beginner
A delicate two tone snake chain in turquoise and gold makes for a lovely adjustable bracelet, complete with two Austrian crystal Classic Cut Pendant Crystals.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

This design is adjustable, please see helpful tips in the video. You will also need a scrap of wire or a toothpick for this project.
  1. Please watch our video: How to Make an Adjustable Slider Bracelet with Snake Chain and Tassels. In this video you will see how to make this bracelet from start to finish as well as some sizing techniques and design tips. The only difference, is instead of the tassels you will use the jump rings to attach the Austrian crystals.
We recommend waiting at least 24 hours before wearing to allow the glue to fully set.

WHAT YOU'LL NEED: (scroll down for purchase options)
  • CHA-1203 - Two, Tone Snake Beading Chain, Turquoise and Gold Tone, 1.25mm, by the Foot
    Project uses 10 Inches. You will need 1 package.

  • BMB-025 - Adjustable Slider Clasp, Tube with Silicone Center 5.5x6.8mm, 4 Pieces, Gold Tone
    Project uses 1 piece. You will need 1 package.

  • FCR-1632 - 22K Gold Plated Barrel Cord Ends With Rings 6.5mm Long - Fits 1.2mm Cord (6)
    Project uses 2 pieces. You will need 1 package.

  • SWCR-6355 - Austrian Crystal, #6430 Round Classic Cut Pendants 8mm, 2 Pieces, Crystal Golden Shadow
    Project uses 2 pieces. You will need 1 package.

  • FJR-5452 - 22K Gold Plated Open Jump Rings 4mm 22 Gauge (50)
    Project uses 2 pieces. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • PL-8154 - Lindstrom 80s Series, Flush Cutter with Medium Tapered Head, 4.43 Inches Long
  • PL-7893A-EX - Lindstrom EX Series, Short Chain Nose Jewelry Pliers, 5.77 Inches Long
Additional Information
Theme Summer, Delicate
Ingredients CHA-1203, BMB-025, FCR-1632, FJR-5452, XTL-1054,
Useful Techniques & Learning Guides
How to Open and Close a Jump Ring

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
You will need 1 package(s).
1 package = .
/ Package | SKU: CHA-1203
You will need 1 package(s).
1 package = .
/ Package | SKU: BMB-025
You will need 1 package(s).
1 package = .
/ Package | SKU: FCR-1632
22K Gold Plated Open Jump Rings 4mm 22 Gauge (50 pcs)
22K Gold Plated Open Jump Rings 4mm 22 Gauge (50 pcs)
You will need 1 package(s).
1 package = 50 Pieces.
$3.37 / Package | SKU: FJR-5452
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$9.21 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Related Products: Design Variations

Sold out
from

Sold out
from

You recently viewed

Clear recently viewed