Retired - Tigers Eye Ladder Chain Bracelet

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Begin by stringing one tigers eye gemstone onto one eye pin. Make a simple wire loop. Set aside. Repeat this step five more times.
2. Take the foot of chain, and open the center link between two bars. Open the link, the same way you would a jump ring. Bring the two ends of the length of chain together. Close the link.
3. You should now have 7 bars on top and 7 bars on bottom.
4. To one end, open one jump ring and attach one side of the magnetic clasp. Repeat on the other side.
5. Take one eye pin with the tigers eye, open one loop, same as you would a jump ring, and attach it to the center link between two bars of chain. Close the loop. Repeat this for the bottom of this eye pin. (See photo for reference)
6. You will repeat the above step for the remaining gemstones moving across the chain.

• CHA-0136 - Gold Plated Bulk Chain, Long Tube and Short Oval Links 5x12mm, Sold By The Foot
  Project uses 1 Foot. You will need 1 package.


• FHP-6257 - 22K Gold Plated Open Eye Pins 22 Gauge 1.5 Inch (x50)
  Project uses 6 pieces. You will need 1 package.


• FJR-5452 - 22K Gold Plated Open Jump Rings 4mm 22 Gauge (50)
  Project uses 2 pieces. You will need 1 package.


• FCL-6682 - 22K Gold Plated Magnetic Clasps 6mm x 8mm (3)
  Project uses 1 piece. You will need 1 package.


• SPTI-11 - Tiger Tigers Eye Gemstone Round 10mm Brown Beads/15.5 Inch Strand
  Project uses 6 pieces. You will need 1 package.

• XTL-5032 - Beadsmith Wire Looping Pliers - Concave And Round Nose
• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers