The Roxbury Slider Bracelet in Gold

Name: The Roxbury Slider Bracelet in Gold
Brand: Beadaholique
SKU: B769
Availability: OutOfStock

PROJECT B769

Designer: Julie Bean

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF
(if available)

This pretty on-trend bracelet is elegant in its simplicity. Wear the chain tails long or cut them short, either way the bracelet is sure to be a worn-often addition to your accessory wardrobe.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

Please note you will need some thread for this project. Just a foot or so and it can be Wildfire, Nymo, Fireline, or any other type of thread.

To see how to make this bracelet from start to finish, please watch the video: How to Make an Adjustable Slider Clasp Bracelet.
In the video you will learn how to get your two chains through the slider clasp. You will also see how to finish off your chain ends by creating little dangles from a head pin and bead.

WHAT YOU'LL NEED: (scroll down for purchase options)

CHA-0180 - Electro-Plated Bulk Chain, Tiny Rectangle Soldered Cable Links 1mm, 1 Foot, Bright Gold
Project uses 1 foot. You will need 1 package.

BMB-021 - Adjustable Slider Clasp, Round with Silicone Center 8mm, 4 Pieces, Gold Tone
Project uses 1 piece. You will need 1 package.

FHP-5221 - 22K Gold Plated Head Pins - 22 Gauge, 2 Inches (X50)
Project uses 2 pieces. You will need 1 package.

BMB-5216 - 22K Gold Plated Thick Heishe Spacers Beads 4.5mm x 2.5mm (144)
Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5032 - Beadsmith Wire Looping Pliers - Concave And Round Nose
XTL-5488 - Xuron Jeweler's Super Fine Pliers Round Nose Pliers
XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex

Additional Information

Theme	Delicate
Ingredients	CHA-0180, BMB-021, FHP-5221, BMB-5216,

Useful Techniques & Learning Guides

How to Make a Wrapped Wire Loop

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Tip: Save this project to your wishlist to easily return to project instructions.

            
You will need 1 package(s).
1 package = .

             / Package | SKU: CHA-0180

            
You will need 1 package(s).
1 package = .

             / Package | SKU: BMB-021

Head Pins, 2 Inches Long and 22 Gauge Thick, 22K Gold Plated (50 Pieces)

            Head Pins, 2 Inches Long and 22 Gauge Thick, 22K Gold Plated (50 Pieces)
        
You will need 1 package(s).
1 package = 50 Pieces.

                $6.00
            
             / Package | SKU: FHP-5221

Sold out

22K Gold Plated Thick Heishe Spacers Beads 4.5mm x 2.5mm (144 pcs)

            22K Gold Plated Thick Heishe Spacers Beads 4.5mm x 2.5mm (144 pcs)
        
You will need 1 package(s).
1 package = 144 Pieces.

                $18.14
            
             / Package | SKU: BMB-5216