Retired - The Megan Cuff in Pink

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. To start this project, glue each lucite rose cabochon to your cuff bracelet by placing some E6000 glue on the backside of the cabochon, flipping it over, and pressing it into place on the cuff. For the first one, place it so that its edge is approximately 1/8" from the edge of the cuff. Glue one and let it dry in an upright position. Next, glue another one right next to the first one and then let it dry in an upright position. Do this until you have 7 roses glued onto your cuff. Let these all dry fully before proceeding to the next step.
2. Mix up 1 part Vintaj Ruby Patina to 3 parts Vintaj Sealer Glaze. Paint this over your flowers, making sure to get into all the crevices. You want the undertone of the blue to show through, just not the actual bright blue itself. Also paint the exposed brass topside of the cuff as well. Let dry. Go back and paint another coat over just the area that was exposed brass, not the flowers. Let dry.
3. Paint 2 coats of Vintaj Ruby Patina over the backside and edges of the cuff. Let dry.
4. So easy yet oh-so pretty!

• BCP-4446 - Lucite Flower Cabochons Blooming Rose Matte Dusty Blue 23mm (2)
  Project uses 7 pieces. You will need 4 packages.


• XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
  Project uses 1 piece. You will need 1 package.


• JB-2571 - Solid Brass Flat Cuff Bracelet Base 19mm (0.75 Inch) Wide (1 Piece)
  Project uses 1 piece. You will need 1 package.


• XTL-9071 - Vintaj Patina Opaque Permanent Ink - Ruby Red - 0.5 Ounce Bottle
  Project uses 1 piece. You will need 1 package.


• XTL-9090 - Vintaj Mini Glaze - Metal Sealer And Patina Extender - 0.5 Ounce Bottle
  Project uses 1 piece. You will need 1 package.