Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
By following the instructions below you will make one earring, repeat all instructions to make the second earring.
- Cut off a 6 inch piece of wire and use the nylon jaw pliers to straighten the wire.
- Using the wire looping pliers, make a wrapped wire loop at one end of the wire. Wrap twice and trim the wire.
- String on one pearl on to the wire and slide it all the up to the wrapped loop.
- Take the chain nose pliers and make a bend in the wire just below the pearl.
- Take the Wubbers Bail Making Pliers and wrap the wire three times around the 9mm side, creating a coil of wire.
- Once you have the three coils trim the wire. You will only need to leave a little extra to make a simple wire loop at the tail of the wire.
- Open one jump ring and attach it to the snail pendant and to the simple wire loop at the bottom of the coil. Close the jump ring.
- Open the loop of the earring hook, same as you would a jump ring and attach it to the top wrapped wire loop. Close the loop.
- All Done!
WHAT YOU'LL NEED: (scroll down for purchase options)
- SWCR-1134 - Austrian Crystal, 6731 Sea Snail Pendant 14mm, 1 Piece, Crystal AB
Project uses 2 pieces. You will need 2 packages.
- SWP-5076 - Austrian Crystal, 5810 Round Faux Pearl Beads 5mm, 50 Pieces, Pearlescent White
Project uses 2 pieces. You will need 1 package.
- FEA-3028 - Sterling Silver Flattened French Earring Hooks 25.5mm Long (10 Pieces)
Project uses 2 pieces. You will need 1 package.
- FJR-8071 - Silver Filled Open Jump Rings 5mm 22 Gauge (24)
Project uses 2 pieces. You will need 1 package.
- WCR-2030 - Artistic Wire, Silver Plated Craft Wire 20 Gauge Thick, 6 Yard Spool, Tarnish Resistant Silver
Project uses 12 Inches. You will need 1 package.
RECOMMENDED TOOLS:- XTL-0032 - Wubbers Bail Making Jewelry Pliers - Large 7mm & 9mm Size
- XTL-5032 - Beadsmith Wire Looping Pliers - Concave And Round Nose
- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
- XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
- XTL-0074 - Eurotool Nylon Jaw Pliers Chain Nose- For Scratch-Free Wire Work