Retired - Studded Skull Bracelet

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Cut 7 inches of cork. Slide on one skull bead. Center it on the cork at your 3 1/2 inch mark.
2. Measure from the center of the skull, 1/2 inch to the right. Using the 2mm setting on the leather hole punch, punch a hole in the center of the cork. Repeat on the left side of the skull.
3. Place a rivet into each hole and use the rivet setter tool to set them into place.
4. From the right rivet move 5/8 inch to the right, punch another hole in the center of the cork. Repeat this step to the left.
5. Slide on one studded bar bead to each side of the cork so that it passes the holes you just made.
6. Place a rivet into each hole and use the rivet setter tool to set them into place.
7. To add the clasp detach the two ends. Move to one end of the bracelet. Place a few drops of super new glue into the recess of one end of the clasp. Slide the cork in and press firmly. Repeat this with the the side of the clasp leaving the bracelet unclasped to dry.

• BMB-10022 - Antiqued Silver Plated Spiked Bar Slider For Regaliz 10mm Flat Cork Cord
  Project uses 2 pieces. You will need 2 packages.


• BMB-9976 - Antiqued Silver Plated Skull Slider Bead For Regaliz 10mm Flat Cork Cord
  Project uses 1 piece. You will need 1 package.


• FCL-1619 - Antiqued Silver Plated Riveted Magnetic Clasp For Regaliz 10mm Flat Cork Cord - 1 Set
  Project uses 1 piece. You will need 1 package.


• FCO-4780 - TierraCast Silver Plated Brass Double Round Cap Compression Rivet Set 4mm - 10 Pieces
  Project uses 4 pieces. You will need 1 package.


• CHX-1132 - Regaliz Flat Portuguese Cork Cord, 10x1.5mm, Sold by the Inch, Black
  Project uses 8 inches. You will need 8 packages.


• XTL-1059 - Eurotool Super New Glue - Heavy Duty Adhesive - 3 Gram Bottle
  Project uses 1 piece. You will need 1 package.

• XTL-5502 - BeadSmith Rotating Leather Hole Punch Tool - Creates 6 Hole Sizes!
• XTL-0786 - TierraCast 4mm Rivet Setter Tool - 1 Tool
• XTL-5500 - Cord Cutter Tool For Regaliz Cord 3 Inches Long
• XTL-0258 - Mini Rubber And Steel Bench Block For Metal Working And Wire Hardening
• XTL-0248 - Eurotool Brass Mallet For Metal Smithing - 1 Pound