Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
Note: you will also need several rubber bands or hair bands for this project.
- To start this project, please watch the video: How to Cover a Brass Cuff in Lillypilly Copper Sheets.
- From what you learned in the video, adhere your copper sheet to your brass cuff using E6000 glue as shown in the video.
- Place the bands over the cuff to hold the copper sheet in place. Let dry.
- Remove the bands and trim your copper sheet as shown in the video.
- Next, gently curve your various gears and cogs using the bracelet bending pliers. You want the curve to mimic that of the bracelet. You might need to curve them with your hands as well. Look at the photo of the bracelet and see where the gears and cogs are positioned along the cuff. Place E6000 glue on the backside of each element and glue it in place. It is best to do one at a time and let if dry for a bit before moving onto the next. When all have been placed, let fully dry overnight.
- All done!
WHAT YOU'LL NEED: (scroll down for purchase options)
- JB-2572 - Solid Brass Flat Cuff Bracelet Base 28.5mm (1 1/8 Inch) Wide (1 Piece)
Project uses 1 piece. You will need 1 package.
- LIL-1033 - Lillypilly Copper Ripple Embossed Sheet Metal Enchantment Patina - 3x6 Inch
Project uses 1 piece. You will need 1 package.
- XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
Project uses 1 piece. You will need 1 package.
- PND-5866 - Antiqued Brass Stamping Steampunk Star Gear Cog Wheel 26mm (2)
Project uses 1 piece. You will need 1 package.
- PND-5865 - Antiqued Silver Plated Stamping Steampunk Star Gear Cog Wheel 26mm (2)
Project uses 1 piece. You will need 1 package.
- PND-5867 - Antiqued Silver Plated Stamping Steampunk Open Gear Cog Wheel 25.5mm (2)
Project uses 2 pieces. You will need 1 package.
- PND-5862 - Antiqued Brass Stamping Steampunk Open Gear Cog Wheel Medium 19mm (2)
Project uses 1 piece. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5700 - Fiskars 5 Precision Tip Scissors - Super Sharp
- XTL-0084 - BeadSmith Bracelet Bending Pliers - Gently Curve Bracelets And Components