Retired - St. Croix Necklace

PROJECT N678
Designer: Julie Bean
Skill Level: Beginner
This island inspired necklace boasts beautiful Austrian crystal faux pearls in coral and turquoise as well as stunning Beadelle Collection crystal pave beads. Hammered gold-toned accents add just the right amount of glitz to complete the design.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Cut a 22" piece of gold beading wire and place a bead stopper 3" from the end.
  2. String onto your wire 1 gold crimp bead and 12 Austrian crystal crystal round faux pearls 5mm in Turquoise.
  3. Next string 1 Tierracast gold plated hammertoned 6mm bead cap, 1 Austrian crystal crystal round faux pearl 8mm in coral, another 6mm bead cap, and a Austrian crystal crystal round faux pearl 5mm in Turquoise. Repeat this segment another 3 times (giving you a total of 4 of these segments).
  4. Now string 1 6mm bead cap, 1 Austrian crystal crystal round faux pearl 8mm in coral, another 6mm bead cap, 1 Beadelle Collection 10mm crystal pave bead in turquoise, another 6mm bead cap, 1 Austrian crystal crystal round faux pearl 10mm in coral, another 6mm bead cap, another 10mm crystal pave bead in turquoise, 1 Tierracast gold plated hammertoned 9mm bead cap, 1 Austrian crystal crystal round faux pearl 12mm in coral, another 9mm bead cap, and 1 Beadelle Collection 14mm crystal pave bead in turquoise.
  5. Make the second half of your necklace a mirror image of the first with the 14mm crystal pave bead as the center point.
  6. Next, thread your wire through both loops of a thread and wire protector. Before taking your wire back through your crimp bead, slip the loop at the back of your toggle bar into the curve of your wire protector. Now thread your wire back through the crimp bead and several beads next to it. Crimp the crimp bead and cut off excess wire with flush cutters.
  7. Go to the other side of your necklace and repeat the last step with the toggle part of your clasp. Make sure to pull snug before you crimp your crimp bead so that all the beads are aligned together with no large gaps.
  8. For the final step, apply a crimp bead cover over both of your crimp beads.
  9. Enjoy!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • BDLL-6155 - Beadelle Crystal 10mm Round Pave Bead - Gold Plated / Turquoise (1 Pc)
    Project uses 4 pieces. You will need 4 packages.

  • BDLL-6163 -
    Project uses 1 piece. You will need 1 package.

  • BMB-3491 - TierraCast 22K Gold Plated Pewter Hammered Bead Caps 6mm (x 8)
    Project uses 24 pieces. You will need 3 packages.

  • BMB-3626 - TierraCast Real 22K Gold Plated Pewter Hammertone Bead Caps 9mm (x 4)
    Project uses 4 pieces. You will need 1 package.

  • FCL-7006 - TierraCast 22K Gold Plated Pewter Hammertone Square Toggle Clasp 23mm (1)
    Project uses 1 piece. You will need 1 package.

  • FCR-1056 - Bright Gold Tone Crimp Bead Covers 3mm (144)
    Project uses 2 pieces. You will need 1 package.

  • FCR-1905 - 22K Gold Plated Crimp Beads 1.5mm x 2mm (100 Beads)
    Project uses 2 pieces. You will need 1 package.

  • FCR-4161 - 22K Gold Plated Wire & Thread Protectors .019 Inch Loops (50)
    Project uses 2 pieces. You will need 1 package.

  • SWP-1010 - Austrian Crystal, 5810 Round Faux Pearl Beads 10mm, 10 Pieces, Coral
    Project uses 2 pieces. You will need 1 package.

  • SWP-1214 - Austrian crystal Faux Pearls, 5810 Round Beads, 12mm, 4 Pieces, Coral
    Project uses 2 pieces. You will need 1 package.

  • SWP-5094 - Austrian Crystal, 5810 Round Faux Pearl Beads 5mm, 50 Pieces, Turquoise
    Project uses 32 pieces. You will need 1 package.

  • SWP-8014 - Austrian Crystal, 5810 Round Faux Pearl Beads 8mm, 25 Pieces, Coral
    Project uses 10 pieces. You will need 1 package.

  • XCR-67593 - Beadalon Wire Gold Color 7 Strand .015 Inch / 30Ft
    Project uses 22 inches. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5200 - Standard Size Beading Crimping Pliers (For 2x2mm & 2x1mm Crimp Beads)
  • XTL-3000 - Bead Stopper- Stop Beads Sliding Off Stringing Material
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
Additional Information
Theme Summer
Ingredients BMB-3491, BMB-3626, FCL-7006, FCR-1056, FCR-4161, XCR-67593,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
TierraCast 22K Gold Plated Pewter Hammered Bead Caps 6mm (8 Pieces)
You will need 3 package(s).
1 package = 8 Pieces.
$4.74 / Package | SKU: BMB-3491
TierraCast Real 22K Gold Plated Pewter
You will need 1 package(s).
1 package = 4 Pieces.
$3.97 / Package | SKU: BMB-3626
TierraCast 22K Gold Plated Pewter Hammertone Square Toggle Clasp 23mm (1)
You will need 1 package(s).
1 package = 1 Set.
$4.27 / Package | SKU: FCL-7006
Crimp Bead Covers, 3mm, Gold Tone (144 Pieces)
You will need 1 package(s).
1 package = 144 Pieces.
$7.59 / Package | SKU: FCR-1056
Wire & Thread Protectors, .019 Inch Loops 22K Gold Plated (50 Pieces)
You will need 1 package(s).
1 package = 50 Pieces.
$3.37 / Package | SKU: FCR-4161
Beadalon Wire Gold Color 7 Strand .015 Inch / 30Ft
You will need 1 package(s).
1 package = 1 Spool.
$7.65 / Package | SKU: XCR-67593
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed