Retired - Sparkly Owl Earrings

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Begin by sliding a black Czech fire polish teardrop bead onto a gunmetal head pin.
2. Next, create a simple wire loop using your round nose pliers.
3. Using your chain nose pliers, open the loop on your gunmetal earring hook (how you would a jump ring) and slide on the top loop of your crystal encrusted owl connector link and close.
4. Next, open your simple wire loop (how you would a jump ring) and slide on the bottom loop from your crystal encrusted owl connector link and close.
5. You�re done!

• FEA-3092 - Gun Metal Plated Plated Fish Hook Earring Hooks (50)
  Project uses 2 pieces. You will need 1 package.


• BCP-5802 - Czech Fire Polished Glass Beads 8 x 6mm Teardrop Jet Black (20)
  Project uses 2 pieces. You will need 1 package.


• FCO-7128 - Crystal Encrusted 2-Ring Connector, Owl Design, 10.5x21mm, 1 Piece, Gun Metal Plated
  Project uses 2 pieces. You will need 2 packages.


• FHP-6318 - Gun Metal Plated Head Pins 1.5 Inches/21 Gauge (50)
  Project uses 2 pieces. You will need 1 package.

• XTL-5100 - Eurotool Pocket Crimper Smallest Size Crimping Pliers-for 1x1mm & 1x2mm Crimps
• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
• XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers