Retired - Sparkling Teardrop Necklace

Name: Retired - Sparkling Teardrop Necklace
Brand: Beadaholique
SKU: N2227
Availability: InStock

PROJECT N2227

Designer: Kat Silvia

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF
(if available)

This Austrian crystal teardrop fancy stone necklace doesn't need any embellishment. This stunning crystal speaks for itself.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

This necklace measures approximately 18 inches. To modify the length, you will need to purchase a different length of finished chain.

Begin by placing a dab of E6000 into the well of the fancy stone setting. Place the crystal into the setting. Set aside and allow to dry.
Next, open jump ring and attach around the center of the chain and to the loop of the fancy stone finding. Close the jump ring.
Please allow the pendant at least 24 hour prior to wearing for maximum bond.

WHAT YOU'LL NEED: (scroll down for purchase options)

SWCR-4192 - Austrian Crystal, 4327 Pear Fancy Stone 30x20mm, 1 Piece, Crystal F
Project uses 1 piece. You will need 1 package.

SWCR-4473 - Austrian Crystal Fancy Stone Pendant Setting, Fits 4327 Pear 30x20mm, 1 Piece, Rhodium Plated
Project uses 1 piece. You will need 1 package.

FJR-5150 - Silver Plated Open Jump Rings 5mm 20 Gauge (x100)
Project uses 1 piece. You will need 1 package.

AXC-98930 - Silver Plated Fine Cable Chain Necklace with Lobster Clasp - 2x1.8mm Links 18 Inches Long
Project uses 1 piece. You will need 1 package.

XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers

Additional Information

Theme	Special Occasion, Bridal
Ingredients	FJR-5150, AXC-98930, XTL-1054,

Useful Techniques & Learning Guides

How to Open and Close a Jump Ring

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

Silver Plated Open Jump Rings 5mm 20 Gauge (100 pcs)

            Silver Plated Open Jump Rings 5mm 20 Gauge (100 pcs)
        
You will need 1 package(s).
1 package = 100 Pieces.

                $3.39
            
             / Package | SKU: FJR-5150

Finished Cable Chain Necklace, Oval Links with Lobster Clasp 2x1.8mm, 18 Inches, Silver Plated

            Finished Cable Chain Necklace, Oval Links with Lobster Clasp 2x1.8mm, 18 Inches, Silver Plated
        
You will need 1 package(s).
1 package = 1 Piece.

                $4.07
            
             / Package | SKU: AXC-98930

E6000 Industrial Strength Glue Adhesive (0.18 fl oz)

            E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
        
You will need 1 package(s).
1 package = 1 Piece.

                $2.19
            
             / Package | SKU: XTL-1054