Retired - Sparkling Champagne Earrings

PROJECT E500
Designer: Kathy Mannix
Skill Level: Beginner
Wear these neutral dangle earrings with anything you choose. These earrings go great with our Sparkling Champagne Bracelet.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. To start this project, thread a headpin with the following in this order:
  2. one 8mm Round Faux Pearl, Platinum
  3. one 6mm Flower Margarita Crystal
  4. one 4mm Round Faux Pearl, Platinum
  5. Create a wire wrap loop. Finish wrapping the loop and trim off excess wire. Make a total of 2, one for each of the earrings. Set aside until project is ready to assemble.
  6. Thread another headpin with the following in this order:
  7. one 6mm Round Crystal Bead �Greige�
  8. one 4mm Bicone Crystal Bead, Sand Opal AB
  9. Create a wire wrap loop. Finish wrapping the loop and trim off excess wire. Make a total of 2, one for each of the earrings. Set aside until project is ready to assemble.
  10. Thread the last headpin with the following in this order:
  11. one 4mm Round Faux Pearl, Platinum
  12. one 6mm Flower Margarita Crystal and one 4mm Bicone Crystal Bead, Sand Opal AB
  13. Create a wire wrap loop. Finish wrapping the loop and trim off excess wire. Make a total of 2, one for each of the earrings. Set aside until project is ready to assemble.
  14. To assemble earrings, open up one of the oval open jumprings and add each dangle, the first one with the 6mm Round Crystal Bead, Sand Opal AB, then the one with the 8mm Round Faux Pearl, Platinum and then the 4mm Round Faux Pearl in that order. Add the entire assembled piece to the earwire hook. Close oval jumpring with pliers. Remember to flip the assembled piece to make a matching mirror image set of earrings.
Keywords: btq-bridalWHAT YOU'LL NEED: (scroll down for purchase options)
  • FJR-03957 - Sterling Silver Open Jump Rings Oval 5x7mm 19 Gauge (10)
    Project uses 2 pieces. You will need 1 package.

  • SWP-4050 - Austrian Crystal, 5810 Round Faux Pearl Beads 4mm, 50 Pieces, Platinum
    Project uses 2 pieces. You will need 1 package.

  • SWP-8050 - Austrian Crystal, 5810 Round Faux Pearl Beads 8mm, 25 Pieces, Platinum
    Project uses 2 pieces. You will need 1 package.

  • SWC-9701 - Austrian Crystal, 3700 Flower Margarita Beads 6mm, 12 Pieces, Crystal AB
    Project uses 4 pieces. You will need 1 package.

  • SWC-06127 - Austrian Crystal, 5000 Round Beads 6mm, 10 Pieces, Greige
    Project uses 2 pieces. You will need 1 package.

  • FHP-3217 - Fancy Sterling Silver 1.5mm Ball Head pins 24 Gauge 1.5 Inch (10)
    Project uses 6 pieces. You will need 1 package.

Additional Information
Theme Special Occasion, Bridal
Ingredients FJR-03957, FHP-3217,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Sterling Silver Open Jump Rings Oval 5x7mm 19 Gauge (10 pcs)
You will need 1 package(s).
1 package = 10 Pieces.
$6.09 / Package | SKU: FJR-03957
Head Pins, with Ball Head 1.5 Inches Long and 24 Gauge Thick Sterling Silver (10 Pieces)
You will need 1 package(s).
1 package = 10 Pieces.
$5.09 / Package | SKU: FHP-3217
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Featured New Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed