Retired - Sophie Too Earrings in Lavender

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Place an 8mm violet crystal cube bead, a silver plated squaredelle spacer bead with crystals, and a 6mm rondelle spacer bead onto a 1.5", 22 gauge sterling silver head pin.
2. Create a simple wire loop after the spacer bead.
3. Cut a 1.5" length of sterling silver 2mm flat cable chain.
4. Open the wire loop on your head pin and insert it into one of the end links of your piece of chain. Close the loop.
5. Gently open the loop on a sterling silver leverback earring and insert it into the loose end link of your chain. Close the loop.

• BCZ-3800 -
  Project uses 2 pieces. You will need 1 package.


• SWC-2891 -
  Project uses 2 pieces. You will need 1 package.


• SWC-5303 - Austrian Crystal, 5305 Rondelle Spacer Beads 6mm, 8 Pieces, Crystal
  Project uses 2 pieces. You will need 1 package.


• FHP-02310 - Head Pins, 1 Inch Long and 22 Gauge Thick, 20 Pieces, Sterling Silver
  Project uses 2 pieces. You will need 1 package.


• FEA-05010 - Earring Findings, Classic Leverback 16x10mm, 2 Pieces, Sterling Silver
  Project uses 2 pieces. You will need 1 package.


• CHA-1619 - Sterling Silver Flat Cable Chain 2mm Unfinished Bulk By The Foot
  Project uses 3 inches. You will need 1 package.

• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
• XTL-5032 - Beadsmith Wire Looping Pliers - Concave And Round Nose