Retired - Something Montana Blue Bridal Bracelet

PROJECT B2123
Designer: Kat Silvia
Skill Level: Intermediate
Austrian crystals are perfect that bride that want to sparkle. They don't come much bigger than these fancy stones. They shine brilliantly, and with a touch of Montana Blue, you have your 'something blue' covered.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

This finished bracelet measures 6.75". To adjust the length, modify the amount of beads on each strand accordingly.
  1. Place the 25x18 crystal fancy stone into the 25x18 setting. Bend the prongs down around the stone using your nylon pliers. You can also use a popsicle stick for this step, in place of the nylon pliers.
  2. Repeat the above step with the other stones in the appropriate settings.
  3. Cut two lengths of beading wire 12 inches each.
  4. Place both wires into a bead stopper, about 2 inches from the end of the wires.
  5. On each wire, string four 4mm pearls, and six 5mm pearls.
  6. On both wires, string one small fancy stone, one medium fancy stone.
  7. On each wire, string one 4mm pearl.
  8. On both wires, string one large fancy stone.
  9. Mirror the stringing order for the other half of the bracelet beginning by stringing one 4mm pearl on each wire, and so on.
  10. Separate the box clasp.
  11. Take one wire, and string on one crimp tube. Thread the wire up through the hole on one side of the clasp, and back down though the crimp tube. Pull to make a the loop of the wire smaller. Crimp the crimp tube. Snip any excess wire. Place a crimp cover over the crimp tube.
  12. Repeat this above step for the other wire on this side. Then move to the other side of the bracelet, remove the bead stopper and repeat.
  13. All done!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • SWCR-9915 - Austrian Crystal Fancy Stone Setting, Fits 4120 25x18mm Oval, 1 Piece, Rhodium Plated
    Project uses 1 piece. You will need 1 package.

  • SWCR-9914 - Austrian Crystal Fancy Stone Setting, Fits 4120 18x13mm Oval, 2 Pieces, Rhodium Plated
    Project uses 2 pieces. You will need 1 package.

  • SWCR-9913 - Austrian Crystal Fancy Stone Setting, Fits 4120 14x10mm Oval, 2 Pieces, Rhodium Plated
    Project uses 2 pieces. You will need 1 package.

  • SWCR-4111 - Austrian Crystal, 4120 Oval Fancy Stones 14x10mm, 1 Piece, Montana F
    Project uses 2 pieces. You will need 2 packages.

  • SWCR-4120 - Austrian Crystal, 4120 Oval Fancy Stones 18x13mm, 1 Piece, Montana F
    Project uses 2 pieces. You will need 2 packages.

  • SWCR-4123 - Austrian Crystal, 4120 Oval Fancy Stone 25x18mm, 1 Piece, Crystal F
    Project uses 1 piece. You will need 1 package.

  • SWP-4001 - Austrian Crystal, 5810 Round Faux Pearl Beads 4mm, 50 Pieces, White
    Project uses 20 pieces. You will need 1 package.

  • SWP-5001 - Austrian Crystal, 5810 Round Faux Pearl Beads 5mm, 50 Pieces, White
    Project uses 24 pieces. You will need 1 package.

  • FCR-1054 - Shiny Silver Tone Crimp Bead Covers 4mm (x144)
    Project uses 4 pieces. You will need 1 package.

  • FCR-1216 - Beadalon Silver Plated Crimp Tubes 1.5mm (68 Beads)
    Project uses 4 pieces. You will need 1 package.

  • FCL-4801 - Rhodium Plated 2-Strand Box Clasp With Austrian crystal 22x12mm (1)
    Project uses 1 piece. You will need 1 package.

  • XCR-5143 - Soft Flex, 21 Strand Fine Beading Wire .014 Inch Thick, 30 Feet, Satin Silver
    Project uses 2 feet. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5608 - Xuron 4 In 1 Crimping Pliers - Works On 1, 2 And 3mm Crimps!
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-0074 - Eurotool Nylon Jaw Pliers Chain Nose- For Scratch-Free Wire Work
  • XTL-3000 - Bead Stopper- Stop Beads Sliding Off Stringing Material
Additional Information
Theme Bridal
Ingredients FCR-1054, FCL-4801, XCR-5143,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Crimp Bead Covers, 4mm, Silver Tone (144 Pieces)
You will need 1 package(s).
1 package = 144 Pieces.
$18.35 / Package | SKU: FCR-1054
Filigree Box Clasps, with Crystals 22x12mm, Rhodium Plated (1 Piece)
You will need 1 package(s).
1 package = 1 Piece.
$13.69 / Package | SKU: FCL-4801
Soft Flex, 21 Strand Fine Beading Wire .014 Inch Thick, Satin Silver (30 Feet)
You will need 1 package(s).
1 package = 1 Spool.
$14.69 / Package | SKU: XCR-5143
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Xuron 4 In 1 Crimping Pliers - Works On 1, 2 And 3mm Crimps
Eurotool Nylon Jaw Pliers Chain Nose- For Scratch-Free Wire Work

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed