Retired - Silver Summer Necklace

PROJECT N2246
Designer: Kat Silvia
Skill Level: Intermediate
This silver necklace features delicate charms and Austrian crystals hanging from a Nunn Design open frame hoop. This is a great new twist on a charm bracelet. Collect charms and trinkets from your next vacation to showcase in this beautiful summer style.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

This necklace measures approximately 24 inches. To modify the length, simply adjust the length of chain on both sides respectively. You will also need a scrap of wire or a toothpick for this project.
  1. Begin by using a toothpick and adding a dab of glue to the well of the fancy stone setting. Add the Austrian Crystal Cushion stone. Set aside to dry.
  2. Cut the Moroccan chain into two equal lengths of 12 inches each.
  3. Open one 6mm 18g jump ring and attach one length of the Moroccan chain to the open hoop. Repeat with the second length. To one end of this chain, attach one lobster clasp with another jump ring. Move to the end of the other chain and attach one jump ring. This completes the top of the necklace.
  4. For the bottom portion, begin by taking one eye pin and stringing on one bicone. Make a simple wire loop. Repeat 10 times.
  5. Open the loop of one eye pin with a bicone on it, same as you would a jump ring, and attach it to another eye pin with a bicone. Close the loop. Open the loop at the other end and attach one small star charm. Repeat this process to make one more length with two bicones, then make one with three and one with four. Set these aside.
  6. Cut three lengths of rolo chain: 1.25", 1.5", 2".
  7. Using 6mm 21g jump rings, attach the pearl white triangle to the 1.25" length of chain; the anchor to the 1.5" length; the crystal setting to the 2" length.
  8. Finally attach all the dangles to the hoop using 6mm 21g jump rings in the following order: 2 bicone/star charm; triangle with chain; 4 bicone/star charm; crystal with chain; 3 bicone/star charm; anchor with chain; 2 bicone/star charm.
We recommend waiting at least 24 hours before wearing to allow the glue to fully set.

WHAT YOU'LL NEED: (scroll down for purchase options)
  • PND-8031 - Antiqued Silver Plated Anchor With Rope Charm 17x15mm (1)
    Project uses 1 piece. You will need 1 package.

  • PND-08337 - Nunn Design Open Frame, Hoop 34.5mm, 1 Piece, Bright Silver
    Project uses 1 piece. You will need 1 package.

  • PND-6070 - Silver Plated Small Puff Nautical Star Charm - 9x6.5mm (6)
    Project uses 4 pieces. You will need 1 package.

  • SWBI-1409 - Austrian Crystal, 5328 Bicone Beads 4mm, 24 Pieces, Crystal Moonlight
    Project uses 11 pieces. You will need 1 package.

  • SWCR-1226 - Austrian Crystal Fancy Stone Setting, 4470 Cushion 10mm, 1 Piece, Rhodium Plated
    Project uses 1 piece. You will need 1 package.

  • PNT-106 - Zola Elements Acetate Pendant, Triangle 16x20mm, 2 Pieces, Pearl White
    Project uses 1 piece. You will need 1 package.

  • SWCR-4568 - Austrian Crystal, 4470 Cushion Fancy Stone 10mm, 1 Piece, Air Blue Opal Foiled
    Project uses 1 piece. You will need 1 package.

  • FHP-6265 - Silver Plated Open Eye Pins 22 Gauge 1 Inch (x50)
    Project uses 11 pieces. You will need 1 package.

  • FJR-5467 - Silver Plated Open Jump Rings 6mm 21 Gauge (50)
    Project uses 1 piece. You will need 1 package.

  • FJR-5168 - Silver Plated Open Jump Rings 6mm 18 Gauge (50)
    Project uses 4 pieces. You will need 1 package.

  • FCL-4715 - Silver Plated Curved Lobster Clasps 12mm (6)
    Project uses 1 piece. You will need 1 package.

  • CHA-0500 - Silver Plated Bulk Chain, Round Rolo 2mm, Sold By The Foot
    Project uses 5 Inches. You will need 1 package.

  • CHA-0417 - Silver Plated Bulk Chain, 7 & 3mm Moroccan Links, Sold By The Foot
    Project uses 24 Inches. You will need 2 packages.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
Additional Information
Theme Summer, Bridal
Ingredients PND-08337, PND-6070, PNT-106, FHP-6265, FJR-5467, FJR-5168, CHA-0500, CHA-0417, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
You will need 1 package(s).
1 package = .
/ Package | SKU: PND-08337
Silver Plated Small Puff Nautical Star Charm - 9x6.5mm (6 pcs)
You will need 1 package(s).
1 package = 6 Pieces.
$3.39 / Package | SKU: PND-6070
Zola Elements Acetate Pendant, Triangle 16x20mm, Pearl White (2 Pieces)
You will need 1 package(s).
1 package = 2 Pieces.
$1.85 / Package | SKU: PNT-106
You will need 1 package(s).
1 package = .
/ Package | SKU: FHP-6265
Silver Plated Open Jump Rings 6mm 21 Gauge (50 pcs)
You will need 1 package(s).
1 package = 50 Pieces.
$3.49 / Package | SKU: FJR-5467
Silver Plated Open Jump Rings 6mm 18 Gauge (50 pcs)
You will need 1 package(s).
1 package = 50 Pieces.
$5.99 / Package | SKU: FJR-5168
Silver Plated Rolo Chain, 2mm, by the Foot
You will need 1 package(s).
1 package = By the Foot.
$2.59 / Package | SKU: CHA-0500
Silver Plated Moroccan Saturn Chain, 7mm, by the Foot
You will need 2 package(s).
1 package = By the Foot.
$8.19 / Package | SKU: CHA-0417
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$2.19 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.49 / Package | SKU: XTL-5514

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed