Retired - Seascape Charm Bangle

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Using your paint brush, apply a coat of Verdigris Teal Vintaj patina into the bezel setting of your Nunn Design triangle charm. Set aside to dry while you continue.
2. Onto a head pin, slide 1 Czech fire polish Aqua bead and create a simple wire loop. Snip off excess wire using your flush cutters. Repeat this process and make a second Aqua bead dangle.
3. Repeat this process and create 2 Turquoise Czech glass melon bead dangles. Set aside.
4. Open a jump ring using your chain nose pliers and slide on the loop from 1 Aqua bead dangle, 1 Turquoise bead dangle and 1 Nunn Design seahorse charm. Before closing, slide it onto the first loop on the left side of your Nunn Design bangle and close. Refer to the photo for assistance.
5. Next, open another jump ring, slide on the loop from your Nunn Design sand dollar charm and slide it onto the second loop on the left side of your bangle and close.
6. Open a jump ring and slide on the loop from your second Aqua bead dangle and attach it onto the bottom bar of your bangle mid section and close.
7. Open a jump ring, slide on the loop from your Nunn Design starfish charm and attach it to the first loop on the right side of your bangle and close.
8. Open a jump ring and slide on the loop from your patinated triangle charm and attach it to the second loop on the right side of your bangle and close.
9. Open one last jump ring and slide on the loop from your second Turquoise melon bead dangle and also slide it onto the second loop on the right side of your bangle and close.
10. That's it!

• JB-2801 - Nunn Design Expandable Charm Bangle Bracelet, Double Bar, 1 Bracelet, Antiqued Gold
  Project uses 1 piece. You will need 1 package.


• FJR-5166 - 22K Gold Plated Open Jump Rings 6mm 18 Gauge (50)
  Project uses 6 pieces. You will need 1 package.


• FHP-5214 - 22K Gold Plated Head Pins - 22 Gauge/1 Inch (50)
  Project uses 4 pieces. You will need 1 package.


• XTL-9073 - Vintaj Patina Opaque Permanent Ink - Verdigris Teal - 0.5 Ounce Bottle
  Project uses 1 piece. You will need 1 package.


• PND-08053 - Nunn Design Charm, Starfish 16.5x19.5mm, 2 Pieces, Antiqued Gold
  Project uses 1 piece. You will need 1 package.


• PND-08085 - Nunn Design Bezel Charm, Triangle 15.5x18.5mm, 2 Pieces, Antiqued Gold
  Project uses 1 piece. You will need 1 package.


• BCP-1174 - Czech Pressed Glass - Round Melon Beads 8mm Diameter 'Turquoise' (25)
  Project uses 2 pieces. You will need 1 package.


• BCP-10368 - Czech Fire Polished Glass Beads 6mm Round Full Pearlized - Aqua On Jet (25)
  Project uses 2 pieces. You will need 1 package.


• PND-05168 - Nunn Design Charm, 10x23mm Seahorse, 1 Piece, Antiqued Gold
  Project uses 1 piece. You will need 1 package.

• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
• XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose