Retired - Romantic Stroll Earrings

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Begin by cutting the chain into two lengths: one 17 links, one 27 links.
2. Take one eye pin and string on one wood bead. Make a simple wire loop facing perpendicular to the opposite loop. Open the loop same as you would a jump ring and attach it to the top loop of the Zola Elements finding. Close the loop.
3. Open the loop of the earring hook, same as you would a jump ring, and attach it to the top loop of the eye pin. Close the loop.
4. Open one jump ring and attach it to one side loop of the Zola Elements finding and to one piece of chain that is 17 links long. Close the jump ring.
5. Move to the end of this chain and attach the other end to the other loop of the Zola Elements finding with a jump ring.
6. Repeat this process with the length of chain that is 27 links long. Make sure the jump rings for this length go on the outside of the other jump rings you already attached.

• PZE-160 - Zola Elements Link, Desert Danmask Y-Connector 20x18mm, 2 Pieces, Antiqued Gold Tone
  Project uses 2 pieces. You will need 1 package.


• BWD-1016 - EuroWood Natural Wood Beads, Round 4mm Diameter, 250 Pieces, Natural
  Project uses 2 pieces. You will need 1 package.


• FJR-5240 - 22K Gold Plated Open Jump Rings 4mm 21 Gauge (x100)
  Project uses 8 pieces. You will need 1 package.


• FHP-6256 - 22K Gold Plated Open Eye Pins 22 Gauge 1 Inch (x50)
  Project uses 2 pieces. You will need 1 package.


• FEA-4030 - Bali Style 1 Ball Gold Plated Earring Hooks (50)
  Project uses 2 pieces. You will need 1 package.


• CHA-0176 - Gold Plated Bulk Chain, Round Soldered Links 2mm, By The Foot, Bright Gold
  Project uses 8 Inches. You will need 1 package.

• XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers