Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
This necklace measures approximately 17 inches. To modify the length, simply use a different sized finished chain respectively.
- Begin by taking one eye pin and string on one bead cap, the Fine Rocks Tube, and one bead cap. Make a simple wire loop. Set this piece aside.
- Take the finished chain and find the center link. Cut it with your flush cutters.
- Open one simple wire loop from the eye pin, same as you would a jump ring, and attach it to one side of the chain. Close the loop. Repeat with the other loop and the other side of the chain.
WHAT YOU'LL NEED: (scroll down for purchase options)
- SWCR-5341 - Austrian Crystal, 5951 Fine Rocks Tube without Metal Ends 30mm, 1 Piece, Crystal Paradise Shine / Black Tubing
Project uses 1 piece. You will need 1 package.
- BMB-3873 - TierraCast Antiqued Silver Plated Pewter Talavera Star Bead Caps 5mm (x 6)
Project uses 2 pieces. You will need 1 package.
- AXC-026 - Finished Cable Chain Necklace, Fine 2x1.8mm Links with Spring Ring Clasp, 16 Inches, Silver Plated
Project uses 1 piece. You will need 1 package.
- FJR-3911 - Silver Plated Open Jump Rings 4mm 20 Gauge (50)
Project uses 2 pieces. You will need 1 package.
- FHP-6267 - Silver Plated Open Eye Pins 22 Gauge 2 Inch (x50)
Project uses 1 piece. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
- XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers