Retired - Ringleader Austrian Crystal Necklace

Retired - Ringleader Austrian Crystal Necklace

Name: Retired - Ringleader Austrian Crystal Necklace
Brand: Beadaholique
SKU: N2093
Availability: OutOfStock

PROJECT N2093

Designer: Kat Silvia

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF
(if available)

This White Tiger Austrian crystal charm swings with the greatest of ease from a GenY brushed silver bar in this elegant long necklace.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

These instructions will give you a necklace that is 30 Inches long. To adjust the length, modify the length of chain used.

Cut two lengths of 13 1/4 inches. Cut two lengths of 1 1/4 inches.
Take one 13 1/4 inch length of chain, open one jump ring and attach it to one end of the chain. Close the jump ring.
To the other end of the chain, open one jump ring and attach the chain to the hole of the silver bar. Close the jump ring.
Open one jump ring, attach it to the silver bar and one length of chain 1 1/4 in. Close the jump ring.
Open one jump ring, attach together the 1 1/4 in of chain and the second 1 1/4 inch of chain. Close the jump ring.
Open one jump ring, attach it to the silver bar and to the second length of chain 1 1/4 in. Close the jump ring.
Open one jump ring and attach it to the silver bar and to the second length of 13 1/4 inch chain. Close the jump ring.
To the end of this chain, open one jump ring and attach it to a lobster clasp. Close the jump ring.
Open one jump ring and attach the tiger pendant to the jump ring in the center bottom part of the chain.
All done!

WHAT YOU'LL NEED: (scroll down for purchase options)

SWCR-1162 - Austrian Crystal, 67511 Tiger Pave Pendant 22mm, 1 Piece, Crystal / Gunmetal
Project uses 1 piece. You will need 1 package.

CHX-1230 - GenY Chain, Saturn with Oval Cable Links 1.5x2mm, 1 Inch, Forever Silver
Project uses 29 Inches. You will need 29 packages.

FCL-2513 - Beautiful Silver Plated Curved Lobster Clasps 10mm (10)
Project uses 1 piece. You will need 1 package.

FJR-5140 - Silver Plated Open Jump Rings 4mm 21 Gauge Thick (100)
Project uses 8 pieces. You will need 1 package.

PND-12028 - GenY Link, Rectangle Bar 30x4mm, 1 Piece, Brushed Forever Silver
Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex

Additional Information

Theme	Pets/Animals
Ingredients	FCL-2513, FJR-5140,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

Lobster Clasps, Curved 12.5mm, Silver Plated (10 Pieces)

            Lobster Clasps, Curved 12.5mm, Silver Plated (10 Pieces)
        
You will need 1 package(s).
1 package = 10 Pieces.

                $8.29
            
             / Package | SKU: FCL-2513

Silver Plated Open Jump Rings 4mm 21 Gauge Thick (100 pcs)

            Silver Plated Open Jump Rings 4mm 21 Gauge Thick (100 pcs)
        
You will need 1 package(s).
1 package = 100 Pieces.

                $2.39
            
             / Package | SKU: FJR-5140