Retired - Woodland Glass Dome Necklace

PROJECT N3064
Designer: Karlin Jones
Skill Level: Intermediate
Create a whimsical woodland scene within a sleek glass dome and show off your imagination in style.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Cut 40" of your red ball chain with your flush cutters. (Remember, you can make your chain length as long as you like). Attach a red ball chain connector clasp onto one end. Set aside for now.
  2. Begin by watching the video on How to Make the Zombie Glass Dome Necklace as it uses a similar technique. For this project, you will be creating a woodland scene in your antiqued brass bezel pendant base. Make sure to leave enough room around the edges to allow for the glass dome to fit on top and enclose your scene once done.
  3. Following what you learned in the video, put on your gloves and mix a gum ball sized amount of sage green Crystal Clay.
  4. Create a hill-like shape of green clay at the center of your base, about 3/4" tall.
  5. Next, using your flush cutters, carefully snip off the loop on your pewter deer charm.
  6. After you have your Crystal Clay in place, decide where the front of your scene will be. Place your pewter deer charm on the top of the hill and place your two ceramic mushroom beads on the side, closer to the base. See photo for placement assistance.
  7. Next, cover the bottom portion of your green clay with an assortment of green Czech glass seed beads in Emerald Mix. Make sure to add some seed beads to the back as well.
  8. Place your glass dome on top, making sure it fits over your clay and covers the clay neatly. Clean up any clay that may be pushed out at the base.
  9. Add a dab of E-6000 glue onto the top center portion of your glass dome and add on your silver plated dome cap. Hold in place for a few moments until it dries.
  10. Once dry, using your chain nose pliers open up a jump ring and slide it through the loop on your pendant cap and close.
  11. Slide your red ball chain through your jump ring. Pull through and connect to the other end of the clasp.
  12. You're done!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • CHA-91811 - Red Color Steel 2mm Ball Chain - Sold Bulk By The Foot
    Project uses 40 inches. You will need 4 packages.

  • FCL-2011 - Red Color Steel Ball Chain Connector Clasps - Fits 2mm (5)
    Project uses 1 piece. You will need 1 package.

  • PND-06001 - Lead-Free Pewter Charms, Elk Deer 24.5mm, 4 Pieces, Antiqued Silver
    Project uses 1 piece. You will need 1 package.

  • BWC-3081 - Hand Painted Ceramic Beads - Small Red Capped Mushroom 11x9mm - Pack of 2
    Project uses 2 pieces. You will need 1 package.

  • TRC-247 - Crystal Clay 2-Part Epoxy Clay Kit 'Sage' 25 Grams
    Project uses 1 piece. You will need 1 package.

  • BCS-6690 - Czech Seed Beads 6/0 ''Irish Green'' Mix Emerald (1 Ounce)
    Project uses 1 tube. You will need 1 package.

  • BGL-01000 - Hollow Glass Dome for Jewelry, 24.5x36.5mm Pill Shape, 2 Pieces
    Project uses 1 piece. You will need 1 package.

  • PND-07001 - Pendant Cap End with Loop, Round 7x8mm, 4 Pieces, Bright Silver Tone
    Project uses 1 piece. You will need 1 package.

  • PND-07000 - Bezel Pendant Base, Round No Loop 25mm, 4 Pieces, Antiqued Brass
    Project uses 1 piece. You will need 1 package.

  • FJR-5150 - Silver Plated Open Jump Rings 5mm 20 Gauge (x100)
    Project uses 1 piece. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
Additional Information
Ingredients BCS-6690, FJR-5150, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Czech Glass Seed Beads, 6/0 Round, Irish Green Mix (1 Ounce)
You will need 1 package(s).
1 package = 1 oz..
$4.75 / Package | SKU: BCS-6690
Silver Plated Open Jump Rings 5mm 20 Gauge (100 pcs)
You will need 1 package(s).
1 package = 100 Pieces.
$3.39 / Package | SKU: FJR-5150
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$2.19 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed