Retired - The Roxbury Slider Bracelet in Brass

PROJECT B768
Designer: Julie Bean
Skill Level: Beginner
This pretty on-trend bracelet is elegant in its simplicity. Wear the chain tails long or cut them short, either way the bracelet is sure to be a worn-often addition to your accessory wardrobe.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

Please note you will need some thread for this project. Just a foot or so and it can be Wildfire, Nymo, Fireline, or any other type of thread.
  1. To see how to make this bracelet from start to finish, please watch the video: How to Make an Adjustable Slider Clasp Bracelet.
  2. In the video you will learn how to get your two chains through the slider clasp. You will also see how to finish off your chain ends by creating little dangles from a head pin and bead.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • CHA-0178 - Electro-Plated Bulk Chain, Tiny Rectangle Soldered Cable Links 1mm, 1 Foot, Antiqued Brass
    Project uses 1 foot. You will need 1 package.

  • BMB-023 - Adjustable Slider Clasp, Round with Silicone Center 8mm, 4 Pieces, Antiqued Brass Tone
    Project uses 1 piece. You will need 1 package.

  • FHP-3033 - Antiqued Brass 2mm Ball Head Pins - 21 Gauge Thick 2 Inches Long (20)
    Project uses 2 pieces. You will need 1 package.

  • BMB-5180 - Antiqued Brass Balloon 4mm Round Beads (100)
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5032 - Beadsmith Wire Looping Pliers - Concave And Round Nose
  • XTL-5488 - Xuron Jeweler's Super Fine Pliers Round Nose Pliers
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
Additional Information
Theme Delicate
Ingredients CHA-0178, BMB-023, FHP-3033,
Useful Techniques & Learning Guides

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Antiqued Brass Delicate Rectangle Cable Chain, 2mm, by the Foot
You will need 1 package(s).
1 package = By the Foot.
$2.79 / Package | SKU: CHA-0178
Adjustable Slider Clasp, Round with Silicone Center 8mm, Antiqued Brass Tone (4 Pieces)
You will need 1 package(s).
1 package = 4 Pieces.
$4.39 / Package | SKU: BMB-023
Head Pins, with Ball Head 2 Inches Long and 21 Gauge Thick, Antiqued Brass (20 Pieces)
You will need 1 package(s).
1 package = 20 Pieces.
$3.95 / Package | SKU: FHP-3033
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Wire Looping Pliers - Concave And Round Nose
Xuron Jeweler's Super Fine Pliers Round Nose Pliers
$23.99 / Package | SKU: XTL-5488

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed