Retired - Genevieve Charm Bangle

PROJECT B3070
Designer: Karlin Jones
Skill Level: Beginner
Inspired by the French countryside, this charm bangle features a curated collection of pretty beads, gemstones and Nunn Design charms. Wear it on your wrist for a chic, yet trendy look.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Onto a head pin, slide 1 green Amazonite gemstone bead and create a wrapped wire loop. Snip off excess wire using your flush cutters.
  2. Onto a head pin, slide 1 Czech fire polish bead in Metallic Gold/Topaz and create a wrapped wire loop. Snip off excess wire using your flush cutters.
  3. Onto a head pin, slide 1 Czech fire polish bead in Pale Green Luster and create a wrapped wire loop. Snip off excess wire using your flush cutters. Repeat again to make a second dangle. Repeat again with a Crystal Gold bead.
  4. Open a jump ring using your chain nose pliers and slide on the loop from 1 pale green bead dangle. Before closing, slide it onto the bar that's within the first loop on the left side of your Nunn Design bangle and close. Refer to the photo for assistance.
  5. Next, open another jump ring, slide on the loop from your Amazonite gemstone bead dangle and slide it onto the second loop on the left side of your bangle and close.
  6. Open a jump ring, slide on the loop from your heart padlock charm and slide it onto the middle bar section of your bangle and close.
  7. Open a jump ring and slide on the loop from your Crystal Gold bead dangle and attach it onto the bar next to the previous charm and close.
  8. Open the loop on your second Pale Green Luster bead dangle (how you would a jump ring) and attach it onto the bar next to the previous bead dangle and close.
  9. Open a jump ring and slide on the loop from your Metallic Gold/Topaz bead dangle and attach it onto the bar next to the previous charm and close.
  10. Take your Nunn Design round flat tag, and place a small dab of E-6000 glue onto the center. Gently place your fleur de lis embellishment on top. Set aside to dry for a few minutes.
  11. Once dry, open a jump ring and slide through the hole on the flat tag. Before closing, slide it onto the second loop on the right side of your bangle and close.
  12. That's it!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • JB-2801 - Nunn Design Expandable Charm Bangle Bracelet, Double Bar, 1 Bracelet, Antiqued Gold
    Project uses 1 piece. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

  • BCP-38147 - Czech Fire Polished Glass Beads 8mm Round Pale Green Luster (25)
    Project uses 2 pieces. You will need 1 package.

  • BCP-3813 - Czech Fire Polished Glass Beads 8mm Round Crystal Gold (25)
    Project uses 1 piece. You will need 1 package.

  • BCP-38127 - Czech Fire Polished Glass Beads 8mm Round Metallic Gold/Topaz (25)
    Project uses 1 piece. You will need 1 package.

  • SPAZ-102 - AA Green Russian Amazonite Gemstone 8-22mm Faceted Nugget Beads (10)
    Project uses 1 piece. You will need 1 package.

  • FJR-5166 - 22K Gold Plated Open Jump Rings 6mm 18 Gauge (50)
    Project uses 7 pieces. You will need 1 package.

  • FHP-5214 - 22K Gold Plated Head Pins - 22 Gauge/1 Inch (50)
    Project uses 5 pieces. You will need 1 package.

  • PND-6859 - Nunn Design Solid Brass Stamping Fleur De Lis Embellishment 9.5x12.5mm (4)
    Project uses 1 piece. You will need 1 package.

  • PND-08073 - Nunn Design Flat Tag, Round Blank with Hole 20mm, 1 Piece, Antiqued Gold
    Project uses 1 piece. You will need 1 package.

  • PND-08057 - Nunn Design Charm, Heart Padlock 7x11mm, 2 Pieces, Antiqued Gold
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Additional Information
Ingredients XTL-1054, BCP-38147, BCP-3813, BCP-38127, FJR-5166, FHP-5214,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$2.19 / Package | SKU: XTL-1054
Czech Fire Polished Glass Beads 8mm Round Pale Green Luster (25 pcs)
You will need 1 package(s).
1 package = 25 Pieces.
$3.89 / Package | SKU: BCP-38147
Czech Fire Polished Glass Bead. 8mm Round, Crystal Gold Half-Coat (1 Strand)
You will need 1 package(s).
1 package = Strand/25pc.
$2.69 / Package | SKU: BCP-3813
Czech Fire Polished Glass Beads 8mm Round Metallic Gold/Topaz (1 Strand)
You will need 1 package(s).
1 package = 1 Strand.
$3.39 / Package | SKU: BCP-38127
22K Gold Plated Open Jump Rings 6mm 18 Gauge (50 pcs)
You will need 1 package(s).
1 package = 50 Pieces.
$4.99 / Package | SKU: FJR-5166
You will need 1 package(s).
1 package = .
/ Package | SKU: FHP-5214
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.49 / Package | SKU: XTL-5514
The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed