Retired - Red Tulip Earrings

Name: Retired - Red Tulip Earrings
Brand: Beadaholique
SKU: E2035
Availability: OutOfStock

PROJECT E2035

Designer: Kat Silvia

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF
(if available)

The beautiful vintage style of these Golem ceramic beads hang delicately on 22K gold plated kidney wires. These are the perfect accessory to a beautiful spring day.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

By following the instructions below, you will make one earring. Repeat all instructions to make the second earring.

Onto one head pin place one bicone, one ceramic round bead, and one bicone. Make sure the bicones sit into the large holes of the round bead. They should be snug.
Make a wrapped wire loop. Trim the end of your head pin and tuck in your wrap as shown in the video.
Open one kidney wire earring hook and thread on the wire loop of the ceramic bead. Close the earring hook.
All done!

WHAT YOU'LL NEED: (scroll down for purchase options)

FEA-6702 - 22K Gold Plated Earring Hooks Kidney Wires 25mm (10 Pairs)
Project uses 2 pieces. You will need 1 package.

SWBI-14150 - Austrian Crystal, 5328 Bicone Beads 4mm, 24 Pieces, Fern Green
Project uses 4 pieces. You will need 1 package.

BWC-590 - Golem Design Studio Ceramic Beads, 14mm Glazed Round Tulip, 2 Pieces, Natural Clay/Red
Project uses 2 pieces. You will need 1 package.

FHP-3022 - 22K Gold Plated 2mm Ball Head Pins 21 Gauge 2 Inches (x20)
Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex

Additional Information

Ingredients

FEA-6702, FHP-3022,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

Earring Findings, Kidney Wire Hook 25mm, Gold Plated (10 Pairs)

            Earring Findings, Kidney Wire Hook 25mm, Gold Plated (10 Pairs)
        
You will need 1 package(s).
1 package = 10 Pairs.

                $3.77
            
             / Package | SKU: FEA-6702

Head Pins, with Ball Head 2 Inches Long and 21 Gauge Thick, 22K Gold Plated (20 Pieces)

            Head Pins, with Ball Head 2 Inches Long and 21 Gauge Thick, 22K Gold Plated (20 Pieces)
        
You will need 1 package(s).
1 package = 20 Pieces.

                $4.07
            
             / Package | SKU: FHP-3022