Retired - Princess Charm Bangle

PROJECT B3074
Designer: Karlin Jones
Skill Level: Beginner
Step into a fairly tale with this adorable charm bangle featuring a collection of pretty charms by TierraCast on a trendy gold plated bangle. Stack a few on your wrist for a personalized look.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Using your chain nose pliers, open a gold plated jump ring and slide on the loop from your TierraCast carriage charm. Before closing, slide your jump ring onto the outer wire section of your bangle. Close your jump ring.
  2. Gather the following beads: 2 pink Beadelle beads, 6 violet beads, 1 pearlized light rose bead and 3 rose beads.
  3. Take 1 pink Beadelle bead and slide it onto a gold plated ball head pin. Create a wrapped wire loop and snip off any excess wire with your flush cutters.
  4. Repeat this process and make wrapped wire dangles with each of your 12 beads.
  5. Using your chain nose pliers, open a jump ring and slide on 1 rose bead, and 2 violet bicone beads via their loops. Before closing, slide the jump ring onto the bottom bar of your bracelet's mid section.
  6. Open a jump ring, slide on the loop from pink Beadelle bead dangle and attach it next to your previous bead dangle and close.
  7. Open a jump ring, slide on the loop from your TierraCast castle charm and attach it next to your Beadelle bead dangle and close.
  8. Using your chain nose pliers, open a jump ring and slide on 1 rose bead, and 2 violet bicone beads via their loops. Before closing, slide the jump ring next to your charm and close.
  9. Open a jump ring, slide on the loop from pink Beadelle bead dangle and attach it next to your 3 bead dangle and close.
  10. Open a jump ring and slide on 1 rose bead, and 2 violet bicone beads via there loops. Attach the jump next to the previous Beadelle bead and close.
  11. Open a jump ring, slide on the loop from your TierraCast crown charm and attach it next to your previous bead dangle and close.
  12. Lastly, open a jump ring and slide on the loop from your light rose bead dangle. Before closing, slide your jump ring onto the right side of the outer wire section of your bangle. Close your jump ring. See photo for reference.
  13. That's it!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • JB-2811 - Expandable Charm Bangle Bracelet, Double Bar, 1 Bracelet, Bright Gold
    Project uses 1 piece. You will need 1 package.

  • FJR-5501 - 22K Gold Plated Open Jump Rings 5mm 19 Gauge (50)
    Project uses 9 pieces. You will need 1 package.

  • SWC-0882 - Austrian Crystal, 5000 Round Beads 8mm, 8 Pieces, Rose
    Project uses 3 pieces. You will need 1 package.

  • FHP-3027 - 22K Gold Plated Ball Head Pins 22 Gauge 1.5 Inch (x20)
    Project uses 12 pieces. You will need 1 package.

  • BCP-10411 - Czech Fire Polished Glass Beads 8mm Round Full Pearlized - Light Rose (25)
    Project uses 1 piece. You will need 1 package.

  • BCZ-5491 - Preciosa Czech Crystal 4mm Bicone Beads 'Violet' (50)
    Project uses 6 pieces. You will need 1 package.

  • BDLL-0606 - Beadelle Crystal 6mm Round Pave Beads - Gold Plated / Light Rose (2 Pcs)
    Project uses 2 pieces. You will need 1 package.

  • PND-5228 - TierraCast 22K Gold Plated Pewter Cinderella Carriage Charm 14.5mm (1)
    Project uses 1 piece. You will need 1 package.

  • PND-5216 - TierraCast 22K Gold Plated Pewter Princess Crown Charm 13mm (1)
    Project uses 1 piece. You will need 1 package.

  • PND-5219 - TierraCast 22K Gold Plated Pewter Fairy Castle Charm 21mm (1)
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
Additional Information
Ingredients FJR-5501, FHP-3027, PND-5228, PND-5216, PND-5219,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
22K Gold Plated Open Jump Rings 5mm 19 Gauge (50 pcs)
You will need 1 package(s).
1 package = 50 Pieces.
$3.27 / Package | SKU: FJR-5501
Head Pins, with Ball Head 1.5 Inches Long and 22 Gauge Thick, 22K Gold Plated (20 Pieces)
You will need 1 package(s).
1 package = 20 Pieces.
$5.09 / Package | SKU: FHP-3027
TierraCast 22K Gold Plated Pewter Cinderella Carriage Charm 14.5mm (1)
You will need 1 package(s).
1 package = 1 Piece.
$1.55 / Package | SKU: PND-5228
TierraCast 22K Gold Plated Pewter Princess Crown Charm 13mm (1 pcs)
You will need 1 package(s).
1 package = 1 Piece.
$1.69 / Package | SKU: PND-5216
TierraCast 22K Gold Plated Pewter Fairy Castle Charm 21mm (1)
You will need 1 package(s).
1 package = 1 Piece.
$1.69 / Package | SKU: PND-5219
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.29 / Package | SKU: XTL-5514

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed