Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
You will also need a toothpick or scrap of wire for this project. These instructions will give you a necklace that is 17 inches. To modify the length, adjust the length of chain accordingly.
- Using a toothpick or scrap of wire place a dab of E6000 on to the center of the flat tag charm. Place one triangle flatback onto the tag. (See photo for reference). Set this aside to dry.
- Cut off 16 inches of chain.
- Open one 4mm jump ring and attach it to the last link of one end of the chain. Close the jump ring.
- Open another 4mm jump ring and attach it to the other end of the chain, and add a lobster clasp. Close the jump ring.
- Open one 5mm jump ring and attach it to the hole of the charm and around the center of the chain. Close the jump ring. This charm should move freely, however if you like you can attach it to a link in the center of the chain so it remains in one spot.
- All done!
WHAT YOU'LL NEED: (scroll down for purchase options)
- SWF-7200 - Austrian Crystal, 2716 Rivoli Triangle Flatback Rhinestone 5mm, 10 Pieces, Crystal
Project uses 1 piece. You will need 1 package.
- CHA-99959 - Matte Gold Plated Slim Rolo Chain 2mm Bulk By The Foot
Project uses 16 Inches. You will need 2 packages.
- PND-3322 - Nunn Design Flat Tag Charm, Triangle 13.5mm, Antiqued Gold Plated
Project uses 1 piece. You will need 1 package.
- FJR-5457 - 22K Gold Plated Open Jump Rings 5mm 21 Gauge (50)
Project uses 1 piece. You will need 1 package.
- FJR-5240 - 22K Gold Plated Open Jump Rings 4mm 21 Gauge (x100)
Project uses 2 pieces. You will need 1 package.
- FCL-4720 - 22K Gold Plated Curved Lobster Clasps 10mm (6)
Project uses 1 piece. You will need 1 package.
- XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
Project uses 1 piece. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex