Click or scroll to zoom
Tap or pinch to zoom
Retired - Peachy Keen Ring
Click or scroll to zoom
Tap or pinch to zoom
Retired - Peachy Keen Ring
Retired - Peachy Keen Ring

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Retired - Peachy Keen Ring

PROJECT R1004
Designer: Megan Milliken
Skill Level: Intermediate
A domed rectangular glass tile and antique silver plated ring finding accent a soft, stylized star motif in this feminine ring.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Begin by selecting an image from a 24 x 48mm rectangle Japanese Motif collage sheet. Rough cut around your chosen image.
  2. Watch the video: How to Make a Keepsake Photo Pendant. Follow the instructions in the video to affix your 21 x 31mm rectangular glass domed tile onto your image using Diamond Glaze adhesive. Disregard the end of the video with shows you how to glue your pendant into a setting.
  3. Make sure you allow your project to dry thoroughly and then trim around the tile.
  4. Watch the video: How to Use Velour Paper to Finish Glass Tile Jewelry. Affix the velour paper to the back of your tile in the same manner as the image. Allow to dry thoroughly and trim around the tile.
  5. Apply a small amount of E6000 adhesive to the glue on pad on an antique silver plated adjustable ring. With your tile face down, center the glue on pad over the ring and press into place firmly.
  6. Allow all adhesives to dry for at least 24 hours before wearing.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • BGL-9056 - Clear Glass Cabochon Rectangle Dome Bead Crystal Magnify 21x31mm (2)
    Project uses 1 piece. You will need 1 package.

  • FRG-0724 - Nunn Design Antiqued Silver Plated Pewter 16mm Round Glue-On Adjustable Ring
    Project uses 1 piece. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

  • XTL-7980 - BeadSmith Velour Paper - Create Backings On Glass Tiles & Cabochon Pieces
    Project uses 1 piece. You will need 1 package.

  • XTL-9448 - Collage Sheet Japanese Motif Patterns 24x48mm Rectangles (1 Sheet)
    Project uses 1 piece. You will need 1 package.

  • XTL-1020 - JudiKins Diamond Glaze Water Based Adhesive (2 Fl. Oz.)
    Project uses 1 bottle. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5700 - Fiskars 5 Precision Tip Scissors - Super Sharp
Additional Information
Ingredients XTL-1054, XTL-1020,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$2.19 / Package | SKU: XTL-1054
JudiKins Diamond Glaze Water Based Adhesive (2 Fl. Oz.)
JudiKins Diamond Glaze Water Based Adhesive (2 Fl. Oz.)
You will need 1 package(s).
1 package = 2 fl. oz..
$10.99 / Package | SKU: XTL-1020
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:
/ Package | SKU: XTL-5700

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed