Retired - Oh Say Can You See? Brooch

Name: Retired - Oh Say Can You See? Brooch
Brand: Beadaholique
SKU: C1010
Availability: OutOfStock

PROJECT C1010

Designer: Megan Milliken

Skill Level: Advanced

Save to Wishlist

Printer Friendly PDF
(if available)

Show your patriotic spirit this July 4th with this cute little pin featuring bead-woven stars in red, silver, and blue.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

Before you begin, watch the video: How to Bead Weave a Star Using Brick Stitch.
Following the instructions in the video, make a star out of the blue beads in the 11/0 Czech seed bead patriotic mix that has 25 beads in the last row of circular brick stitch. Use black Wildfire beading thread with the blue beads.
Repeat to make a star with the red beads and black Wildfire. Then make a star with the silver beads and white Wildfire.
Tie off and weave in all of your loose threads.
Arrange the stars as shown in the photo, or however you like. Use a bit of E6000 adhesive to secure them in place and allow to dry for at least an hour before continuing.
Flip your piece over. Apply some E6000 to the flat side of a silver tone bar pin back and press it onto the back side of your beaded piece. Make sure that the entire length of the pin back is flat against the beaded surface. Allow all glue to dry for at least 24 hours before wearing.

WHAT YOU'LL NEED: (scroll down for purchase options)

BCS-1913 - Czech Seed Beads Patriotic Mix 11/0 Red White Blue
Project uses 1 hank. You will need 1 package.

FCO-9040 - Silver Tone Glue On Bar Pin Back 3/4 Inch (20mm) (24 Pieces)
Project uses 1 piece. You will need 1 package.

XCR-8933 - Wildfire Thermal Bonded Beading Thread .006 Inch - White- 50 Yd
Project uses 1 piece. You will need 1 package.

XCR-8935 - Wildfire Thermal Bonded Beading Thread .006 Inch - Black - 50 Yd
Project uses 1 piece. You will need 1 package.

XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:

XTL-3006 - Beadsmith English Beading Needles Size 12 (4 Needles)
XTL-5700 - Fiskars 5 Precision Tip Scissors - Super Sharp
XTL-0106 - BeadSmith Cordless Thread Zap II Thread Burner Tool

Additional Information

Theme	USA/Patriotic
Ingredients	FCO-9040, XCR-8933, XCR-8935, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

Silver Tone Glue On Bar Pin Back 3/4 Inch (20mm) (24 Pieces)

            Silver Tone Glue On Bar Pin Back 3/4 Inch (20mm) (24 Pieces)
        
You will need 1 package(s).
1 package = 24 Pieces.

                $4.27
            
             / Package | SKU: FCO-9040

Wildfire Thermal Bonded Beading Thread .006 Inch - Frost / White- 50 Yd

            Wildfire Thermal Bonded Beading Thread .006 Inch - Frost / White- 50 Yd
        
You will need 1 package(s).
1 package = 1 Spool.

                $10.29
            
             / Package | SKU: XCR-8933

Wildfire Thermal Bonded Beading Thread .006 Inch - Black - 50 Yd

            Wildfire Thermal Bonded Beading Thread .006 Inch - Black - 50 Yd
        
You will need 1 package(s).
1 package = 1 Spool.

                $10.29
            
             / Package | SKU: XCR-8935

E6000 Industrial Strength Glue Adhesive (0.18 fl oz)

            E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
        
You will need 1 package(s).
1 package = 1 Piece.

                $2.19
            
             / Package | SKU: XTL-1054