Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

By following the instructions below, you will make one earring. Repeat all instructions to make the second earring.
  1. Begin by watching the video: How to Make Tassels for Jewelry.
  2. Following what you learned in the video, measure, cut and create a 3 inch tassel using your black waxed cotton cord. (You can make your tassel even longer if you'd like, since you will be adding on seed beads and snipping off some length. Also keep in mind that I have added an additional inch for knotting)
  3. Once your tassel is done, add on 10 gold seed beads onto each length of cord. Tie a simple overhand knot and snip off any excess cord using your scissors.
  4. Next, add a dab of E-6000 glue into your gold plated barrel cord end. Take the top portion of your tassel and gently place it in the glue. See photo for placement assistance. Set aside to dry.
  5. Next, using your chain nose pliers, open a gold plated jump ring and slide it through the top loop on your cord end and also the bottom loop of your lever back earrings and close.
  6. That's it!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

  • XCR-4220 - Economy Waxed Cotton Necklace Cord 1.5mm Black 10 Yards (30 Feet)
    Project uses 9 feet. You will need 1 package.

  • FCR-1608 - Beadsmith Gold Plated Barrel Cord Ends With Ring 12mm Long - Fits Up To 6.5mm Cord (4)
    Project uses 2 pieces. You will need 1 package.

  • JSH-0277 - Toho Round Seed Beads 8/0 PF557 'Galvanized Starlight' 8g
    Project uses 1 tube. You will need 1 package.

  • FEA-6016 - 22K Gold Plated Earring Findings Leverbacks (5 Pairs)
    Project uses 1 pair. You will need 1 package.

  • FJR-5166 - 22K Gold Plated Open Jump Rings 6mm 18 Gauge (50)
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5700 - Fiskars 5 Precision Tip Scissors - Super Sharp
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Additional Information
Theme Boho
Ingredients XTL-1054, XCR-4220, FCR-1608, JSH-0277, FEA-6016, FJR-5166,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Tip: Save this project to your wishlist to easily return to project instructions.
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$2.09 / Package | SKU: XTL-1054
Economy Waxed Cotton Necklace Cord 1.5mm Black 10 Yards (30 Feet)
You will need 1 package(s).
1 package = 30 Feet.
$2.99 / Package | SKU: XCR-4220
The Beadsmith Cord Ends, Barrel with Ring 12mm, Fits 6.5mm Cord, Gold Plated (4 Pieces)
You will need 1 package(s).
1 package = 4 Pieces.
$3.47 / Package | SKU: FCR-1608
Toho Round Seed Beads 8/0 #PF557 'Galvanized Starlight' 8g
You will need 1 package(s).
1 package = 1 Tube.
$3.85 / Package | SKU: JSH-0277
Earring Findings, Interchangeable Leverbacks 17x9mm, Gold Plated (5 Pairs)
You will need 1 package(s).
1 package = 5 Pairs.
$4.67 / Package | SKU: FEA-6016
22K Gold Plated Open Jump Rings 6mm 18 Gauge (50 pcs)
You will need 1 package(s).
1 package = 50 Pieces.
$4.99 / Package | SKU: FJR-5166
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Tulip Premium Scissors, Gold Handle 5-Inch
$29.15 / Package | SKU: XTL-0373

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed